Sodastream Fountain Jet A200 Co2 Tube Replacement Repair Guide

Difficulty

Very easy

Steps

Time Required

                          10 minutes

Sections

CO2 Tube
5 steps

Flags

BackSodaStream Fountain Jet A200
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

Step 1

              Removing the front cover

Locate the two prongs at the bottom of the button which releases the bottles (at the front of the machine).
Push both prongs down together; pull this part of the machine out towards you.

Locate the two prongs at the bottom of the button which releases the bottles (at the front of the machine).

Push both prongs down together; pull this part of the machine out towards you.

1024

Step 2

              Removing the back cover

Press in the two gray oval shaped buttons found on either side.
Gently pull back on the cover until it releases from the device.
Release the buttons and pull the back completely off.

Press in the two gray oval shaped buttons found on either side.

Gently pull back on the cover until it releases from the device.

Release the buttons and pull the back completely off.

Step 3

              Removing the Carbonation button

Place your hand under the carbonation button and pull up and away from you, towards the back of the machine.
Warning: be careful not to pull too hard on the carbonation button; there is a spring under this button that can become loose.

Place your hand under the carbonation button and pull up and away from you, towards the back of the machine.

Warning: be careful not to pull too hard on the carbonation button; there is a spring under this button that can become loose.

Step 4

              Tightening caps on tubes

Under the carbonation button, at the end of the slim black tube will be a white cap, turn the cap in a counter clock wise motion to remove.
Locate the second white cap, on the front of the machine. Reattach both white caps by turning them in a clockwise direction, ensuring they are on tight.

Under the carbonation button, at the end of the slim black tube will be a white cap, turn the cap in a counter clock wise motion to remove.

Locate the second white cap, on the front of the machine. Reattach both white caps by turning them in a clockwise direction, ensuring they are on tight.

Step 5

              Putting machine back together

Line up the prongs on the front cover with those on the machine and gently push until in place.

Line up the prongs on the front cover with those on the machine and gently push until in place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      8 other people completed this guide.

Author

                                      with 3 other contributors

                    Katie Fetters

Member since: 09/17/2014

791 Reputation

                                      4 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       University of Kentucky Louisville, Team 1-2, Mathis Fall 2014                        

                                                  Member of University of Kentucky Louisville, Team 1-2, Mathis Fall 2014 



                    LOUISVILLE-MATHIS-F14S1G2                     


                                            3 Members                     


                                            4 Guides authored

Craig V - Apr 17, 2017

Where do you find that black tube with the white caps on the internet. My white cap broke and can’t find the replacement part.

brockybeek - Oct 5, 2017

mine broke too. plastic nut split in half. probably from chill of CO2 expansion.

where to get replacement part?

Michel Bastien - Jan 3, 2018

I’m trying to find this nut and tube everywhere. any idea where we can purcase it? or the size and pitch of the nuts au tube?

jess youngquest - Jan 20, 2018

that makes four of us— where’s the tubing available??

jimmylasvegas - Aug 9, 2018

Sodastream refuses to sell parts. Maybe get a non working one on eBay for parts.

Introduction#

Team#

Introduction

Team