Sol Republic Deck Bluetooth Button Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

1

• Bluetooth Button
• 7 steps

Flags

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackSol Republic Deck

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Bluetooth Button               

• With plastic spudger wedge in between the top and bottom casings to force sepearation . Exposing the inside components of the Republic Deck.

With plastic spudger wedge in between the top and bottom casings to force sepearation . Exposing the inside components of the Republic Deck.

1024

Step 2

• Use the screwdriver to unscrew two 3.6mm Phillips #0 screws securing the plastic plate.

Use the screwdriver to unscrew two 3.6mm Phillips #0 screws securing the plastic plate.

Step 3

• Remove the ribbon cable from the circuit board.

Remove the ribbon cable from the circuit board.

Step 4

• Plug in de-soldering kit and wait 3 minutes for the solder to heat up.
• Use the tip of your soldering iron to heat the old solder unit and apply until it melts.
• Remove speaker wires connecting the speaker to the circuit board.

Plug in de-soldering kit and wait 3 minutes for the solder to heat up.

Use the tip of your soldering iron to heat the old solder unit and apply until it melts.

Remove speaker wires connecting the speaker to the circuit board.

Step 5

• Unscrew five 3.6 mm Phillips #0 screws securing the circuit board.

Unscrew five 3.6 mm Phillips #0 screws securing the circuit board.

Step 6

• Unscrew fifteen 6.2mm Phillips #0 screws and lift the black plastic plate from the case.

Unscrew fifteen 6.2mm Phillips #0 screws and lift the black plastic plate from the case.

Step 7

• Remove the three 3.6mm Phillips #0 screws.
• Remove the circuit board containing the BlueTooth button.

Remove the three 3.6mm Phillips #0 screws.

Remove the circuit board containing the BlueTooth button.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Jonathan Holtman                     

Member since: 03/20/2017

368 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       IUPUI, Team S3-G1, Baechle Spring 2017                        

                                                  Member of IUPUI, Team S3-G1, Baechle Spring 2017 



                    IUPUI-BAECHLE-S17S3G1                     


                                            3 Members                     


                                            3 Guides authored