Sol Republic Deck Volume Buttons Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 - 20 minutes

Sections

Volume Buttons
3 steps

Flags

BackSol Republic Deck
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Volume Buttons

When working with electronics, it’s important to choose a tool that’s ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.
To separate the front face plate from the bottom half of the speaker, insert a spudger into the the middle groove.
Insert another spudger into the middle groove to hold the front plate up as you separate both plates on all sides. Use multiple opening tools to keep plates separated if necessary.

When working with electronics, it’s important to choose a tool that’s ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.

To separate the front face plate from the bottom half of the speaker, insert a spudger into the the middle groove.

Insert another spudger into the middle groove to hold the front plate up as you separate both plates on all sides. Use multiple opening tools to keep plates separated if necessary.

1024

Step 2

Locate the black plastic volume buttons on each side of the back of the speaker face.
A piece of black tape on the side panel may also be covering the yellow connector tip that holds the volume button in place. Remove the black tape if necessary.

Locate the black plastic volume buttons on each side of the back of the speaker face.

A piece of black tape on the side panel may also be covering the yellow connector tip that holds the volume button in place. Remove the black tape if necessary.

Step 3

Using the plastic spudger, pry the button from the front plate of the speaker. The volume button is connected to the speaker by a plastic tab that has blue glue holding it down. The entire volume button can be removed from the front plate by carefully using the spudger to lift it up until it comes off.

Using the plastic spudger, pry the button from the front plate of the speaker. The volume button is connected to the speaker by a plastic tab that has blue glue holding it down. The entire volume button can be removed from the front plate by carefully using the spudger to lift it up until it comes off.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 4 other contributors

                    Rebekah Simmons

Member since: 09/24/2015

221 Reputation

                                      1 Guide authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       University of Alabama, Team 1-1, Sydow campbell Fall 2015                        

                                                  Member of University of Alabama, Team 1-1, Sydow campbell Fall 2015 



                    UA-SYDOW CAMPBELL-F15S1G1                     


                                            5 Members                     


                                            3 Guides authored

Rebecca Parrish - Jun 23, 2016

Thanks for the help

Shelby Ray - Sep 27, 2016

No problem! Glad you were able to fix your speaker :)

nick ed - Apr 10, 2017

So I dropped my speaker from 2 ft and the volume up doesn’t work even after opening it up and trying to replace it. Is there any thing I may have missed?

Introduction#

What you need#

#

#

#

#

#

Team#

#

Introduction

What you need

Team