Difficulty
Very easy
Steps
5
Time Required
5 minutes
Sections
2
- Replace Battery Holder
- 3 steps
- Battery
- 2 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackSolio Bolt
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Remove Screw
- Open the solar panel of the Solio Bolt. Using a philips screwdriver, remove the screw.
Open the solar panel of the Solio Bolt. Using a philips screwdriver, remove the screw.
1024
Step 2
Open Case
- Use a plastic spudger to pry apart the case.
Use a plastic spudger to pry apart the case.
Step 3
Remove The 'Battery Holder' Assembly
- Use a philips screwdriver to remove the three screws securing the battery cradle to the device case.
Use a philips screwdriver to remove the three screws securing the battery cradle to the device case.
Step 4
Free Motherboard
- Move the battery slightly, the motherboard can now be lifted from the device case.
Move the battery slightly, the motherboard can now be lifted from the device case.
Step 5
Discconnect Battery
- On the underside of the motherboard, remove the battery lead from its connecting terminal.
On the underside of the motherboard, remove the battery lead from its connecting terminal.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Ethel
Member since: 10/29/2014
324 Reputation
3 Guides authored
Badges:
5
+2 more badges
Team
UMass Dartmouth, Team 1-3, Shastany Fall 2014
Member of UMass Dartmouth, Team 1-3, Shastany Fall 2014
UMASSD-SHASTANY-F14S1G3
3 Members
3 Guides authored
