Difficulty
Moderate
Steps
6
Time Required
Suggest a time??
Sections
1
- Midwoofer
- 6 steps
Flags
3
Grammar Police
Embrace your inner English teacher and help improve this guide’s grammar!
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackSonos Five
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Step 1
Grill Removal
- Use a thin guitar pick to carefully pry up on the grill
- Be sure the pick is being wedged between the side of the casing and the rubber grill frame, and not the plastic mesh itself!
Use a thin guitar pick to carefully pry up on the grill
Be sure the pick is being wedged between the side of the casing and the rubber grill frame, and not the plastic mesh itself!
1024
Step 2
Grill Removal Continued
- Continue freeing the grill
- Make sure to note the circled posts when reinstalling to prevent damage
Continue freeing the grill
Make sure to note the circled posts when reinstalling to prevent damage
Step 3
Left Midwoofer Removal
- Remove the four T20 screws securing the driver to the front panel.
- Be sure to align the speaker properly with it’s alignment posts during reinstallation (third photo)
Remove the four T20 screws securing the driver to the front panel.
Be sure to align the speaker properly with it’s alignment posts during reinstallation (third photo)
Step 4
Disconnecting The Driver
- The insulated terminal simply disconnects
- The non insulated terminal has a tab that must be depressed to remove.
- Remove the midwoofer from the unit
The insulated terminal simply disconnects
The non insulated terminal has a tab that must be depressed to remove.
Remove the midwoofer from the unit
Step 5
Center Midwoofer removal
- Remove the four T20 screws securing the driver to the front panel.
- Lift the midwoofer out of the cabinet slightly to disconnect the terminals
- The center midwoofer driver wires are extremely short. Care must be taken to not strain the wires. This is a two handed operation of holding the driver while disconnecting the terminals
- The insulated terminal simply slides off, but the non insulated terminal has a locking tab that must be depressed.
Lift the midwoofer out of the cabinet slightly to disconnect the terminals
The center midwoofer driver wires are extremely short. Care must be taken to not strain the wires. This is a two handed operation of holding the driver while disconnecting the terminals
The insulated terminal simply slides off, but the non insulated terminal has a locking tab that must be depressed.
Step 6
Right Midwoofer Removal
- Remove the four T20 screws securing the driver to the front panel
- Lift the driver out of the cabinet.
- The left noninsulated terminal has a locking tab that must be depressed. The right terminal simply pulls off
Remove the four T20 screws securing the driver to the front panel
Lift the driver out of the cabinet.
The left noninsulated terminal has a locking tab that must be depressed. The right terminal simply pulls off
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Nicholas Ouimet
Member since: 10/16/2009
3,299 Reputation
12 Guides authored
Badges:
24
+21 more badges