Difficulty

Moderate

Steps

6

Time Required

                          15 minutes

Sections

2

  • Bottom Panel
  • 3 steps
  • Subwoofer
  • 3 steps

Flags

0

  • BackSonos Playbase

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Bottom Panel
  • Turn the Playbase upside down so that the “Sonos Playbase” imprint is face up.
  • Remove the bottom panel with an Opening Tool by inserting underneath and prying upwards.
  • Melt the adhesive with an iOpener for ease of opening
  • Use a Metal Spudger if the plastic spudgers do not work.
  • Take care to avoid damaging the plastic or the device if using a metal spudger.

Turn the Playbase upside down so that the “Sonos Playbase” imprint is face up.

Remove the bottom panel with an Opening Tool by inserting underneath and prying upwards.

Melt the adhesive with an iOpener for ease of opening

Use a Metal Spudger if the plastic spudgers do not work.

Take care to avoid damaging the plastic or the device if using a metal spudger.

1024

Step 2

  • Remove the fourteen 11mm T-10 screws by turning counter-clockwise.
  • Remove the seven 44mm T-20 screws by turning counter-clockwise.
  • Remove the twenty-two 34mm T-20 screws by turning counter-clockwise.
  • Record where each screw belongs for easier reassembly.

Remove the fourteen 11mm T-10 screws by turning counter-clockwise.

Remove the seven 44mm T-20 screws by turning counter-clockwise.

Remove the twenty-two 34mm T-20 screws by turning counter-clockwise.

Record where each screw belongs for easier reassembly.

Step 3

  • Remove the metal plate with a Opening Tool by inserting underneath and prying upwards.
  • Use a metal spudger if plastic openers do not work.
  • Take care to avoid damaging the plastic or the device if using a metal spudger.

Remove the metal plate with a Opening Tool by inserting underneath and prying upwards.

Use a metal spudger if plastic openers do not work.

Step 4

              Subwoofer
  • Remove the three 18mm T-20 length screws by turning counter-clockwise and pulling up.
  • Remove the three 38mm T-55 length screws by turning counter-clockwise and pulling up.

Remove the three 18mm T-20 length screws by turning counter-clockwise and pulling up.

Remove the three 38mm T-55 length screws by turning counter-clockwise and pulling up.

Step 5

  • Unclip the red and black wiring from the subwoofer by pulling them away from the subwoofer.

Unclip the red and black wiring from the subwoofer by pulling them away from the subwoofer.

Step 6

  • Remove the subwoofer by gently lifting it up.

Remove the subwoofer by gently lifting it up.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Clayton Lipping

Member since: 10/08/2018

165 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team S17-G2, White Fall 2018                        

                                                  Member of Cal Poly, Team S17-G2, White Fall 2018 



                    CPSU-WHITE-F18S17G2                     


                                            4 Members                     


                                            8 Guides authored