Difficulty
Easy
Steps
3
Time Required
3 minutes
Sections
1
- Lens Assembly
- 3 steps
Flags
0
BackSony a7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
If the lens attachment is unable to affix to the camera or take photos, or the camera’s shutter door fails to operate consistently, there is a chance that the lens assembly needs to be repaired. Before beginning this process, it may be helpful to reference this troubleshooting page, which could help with addressing issues before having to go through the process of removing the lens assembly. The tool necessary to complete this replacement guide is a PH00 Phillips screwdriver. No special skills or technical degrees are required to understand this replacement guide.
What you need
Step 1
Lens Assembly
- Position the camera so that the lens and front “SONY” logo will be facing forward and upright.
Position the camera so that the lens and front “SONY” logo will be facing forward and upright.
1024
Step 2
- Remove each of the four M1.5x4mm screws with a PH00 Phillips screwdriver.
Remove each of the four M1.5x4mm screws with a PH00 Phillips screwdriver.
Step 3
- Lift the circular, metallic plate out of the base of the lens assembly, and set it aside.
Lift the circular, metallic plate out of the base of the lens assembly, and set it aside.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Jeffrey Coleman
Member since: 01/14/2020
1,130 Reputation
6 Guides authored
Badges:
15
+12 more badges
Team
Embry-Riddle Aeronautical University, Team S16-G2, Branham Spring 2020
Member of Embry-Riddle Aeronautical University, Team S16-G2, Branham Spring 2020
ERAU-BRANHAM-S20S16G2
3 Members
9 Guides authored