Difficulty
Easy
Steps
3
Time Required
2 minutes
Sections
1
- Gasket Seal
- 3 steps
Flags
0
BackSony Action Cam Mini HDR-AZ1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Gasket Seal
- To open the case, slide the tab located on the underside of the case to the “unlock” position.
- Press in the tabs, that are on the sides of the unlock tab, and pull down. This should cause the lid to open.
- Remove the lid.
To open the case, slide the tab located on the underside of the case to the “unlock” position.
Press in the tabs, that are on the sides of the unlock tab, and pull down. This should cause the lid to open.
Remove the lid.
1024
Step 2
- Using the plastic opening tool, wedge it between the O-Ring and the groove.
- Move the tool around the ring, prying the gasket from the groove, until it is able to be grabbed.
Using the plastic opening tool, wedge it between the O-Ring and the groove.
Move the tool around the ring, prying the gasket from the groove, until it is able to be grabbed.
Step 3
- Remove the O-Ring from the lid of the case.
Remove the O-Ring from the lid of the case.
To place a new gasket in, follow these steps in reverse order, making sure the gasket is fully pushed back in around its entire perimeter.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Mathieu LaFond
Member since: 10/27/2015
425 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
UMass Dartmouth, Team 5-7, Gulbrandsen Fall 2015
Member of UMass Dartmouth, Team 5-7, Gulbrandsen Fall 2015
UMASSD-GULBRANDSEN-F15S5G7
3 Members
10 Guides authored
