Difficulty
Very easy
Steps
2
Time Required
15 seconds - 1 minute
Sections
1
- Battery
- 2 steps
Flags
0
BackSony Alpha 5100
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Slide the on/off switch to “off” to power off your device. To assure yourself it’s off, check that no screens are still on and no lights on the device are flashing either.
Before inserting a new battery, make sure the battery holder is free of dust. Make sure all metal contacts are clean of rust and other damage because this could be a problem later on.
Step 1
Battery
- Slide the power switch on the top of the camera to “off.”
- Turn the camera over to the bottom, and push the latch towards the side marked “open” to release the battery cover.
Slide the power switch on the top of the camera to “off.”
Turn the camera over to the bottom, and push the latch towards the side marked “open” to release the battery cover.
1024
Step 2
- Push the blue spring-loaded lever to release the battery.
- Remove the battery from the camera.
Push the blue spring-loaded lever to release the battery.
Remove the battery from the camera.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Kevin Raggiani
Member since: 10/30/2019
444 Reputation
3 Guides authored
Badges:
9
+6 more badges
Team
UMass Dartmouth, Team S4-G6, Saloman Fall 2019
Member of UMass Dartmouth, Team S4-G6, Saloman Fall 2019
UMASSD-SALOMAN-F19S4G6
3 Members
8 Guides authored