Difficulty

Moderate

Steps

5

Time Required

                          10 - 20 minutes            

Sections

1

  • LCD
  • 5 steps

Flags

Missed a Step

Oops! This guide is currently missing some important steps.

  • BackSony Alpha 5100

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              LCD               
  • Slide the power switch on the top of the camera to “off.”

Slide the power switch on the top of the camera to “off.”

1024

Step 2

  • Flip the LCD screen so that you have access to the back of the screen. The front of the screen should be facing the direction that the lens is facing.

Flip the LCD screen so that you have access to the back of the screen. The front of the screen should be facing the direction that the lens is facing.

Step 3

  • Remove the two 2mm Phillips #00 screws on the back of the screen.
  • Remove the two 2mm Phillips #00 screws on the top of the LCD screen.

Remove the two 2mm Phillips #00 screws on the back of the screen.

Remove the two 2mm Phillips #00 screws on the top of the LCD screen.

Step 4

  • Carefully pry open the back plate off the screen with an iFixit opening tool.
  • If separating the plates is giving you trouble, aim for the notch at the bottom of the plate.

Carefully pry open the back plate off the screen with an iFixit opening tool.

If separating the plates is giving you trouble, aim for the notch at the bottom of the plate.

Step 5

  • Carefully open the back plate of the screen.

Carefully open the back plate of the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Kevin Raggiani                     

Member since: 10/30/2019

444 Reputation

                                      3 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       UMass Dartmouth, Team S4-G6, Saloman Fall 2019                        

                                                  Member of UMass Dartmouth, Team S4-G6, Saloman Fall 2019 



                    UMASSD-SALOMAN-F19S4G6                     


                                            3 Members                     


                                            8 Guides authored                     

John Meldrum - Jul 19, 2020

Reply

Hello, thank you for this but it’s only half the steps, how to remove the LCD and touch screen after step 5? Something else is holding it in place. Can lift the outer edge a little only. Possibly it is glue or tape? My touchscreen is always active and focus rectangle moving around the lower part of screen. Can touch screen and it will go there but soon moves back to lower area.

Thank you.