Sony Alpha A350 Front Case Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          15 minutes

Sections

Front Case
5 steps

Flags

BackSony Alpha A350
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Front Case

Using a Phillips #00 Screwdriver, remove the four 5.5mm screws from the bottom of the camera.
Using a Phillips #00 Screwdriver, remove the one 4.3mm screw.

Using a Phillips #00 Screwdriver, remove the four 5.5mm screws from the bottom of the camera.

Using a Phillips #00 Screwdriver, remove the one 4.3mm screw.

1024

Step 2

Using a Phillips #00 screwdriver, remove one 3.6mm screw on the left side of the camera.
Open the remote / DC under the rubber flap to reveal a screw.
Using the Phillips #00 screwdriver, remove one 4.3mm screw.

Using a Phillips #00 screwdriver, remove one 3.6mm screw on the left side of the camera.

Open the remote / DC under the rubber flap to reveal a screw.

Using the Phillips #00 screwdriver, remove one 4.3mm screw.

Step 3

Open the flash on the top of the camera and remove two 4.3mm screws with a Phillips #00 screwdriver.
If the spring guard falls out during deconstruction, gently place the guard over the spring during construction.
To open the flash, simply press the button on the left side.

Open the flash on the top of the camera and remove two 4.3mm screws with a Phillips #00 screwdriver.

If the spring guard falls out during deconstruction, gently place the guard over the spring during construction.

To open the flash, simply press the button on the left side.

Step 4

Open the plastic SD card door.
Using Phillips #00 screwdriver, remove two 4.4 mm screws outside and two 4.4mm screws inside the door.

Open the plastic SD card door.

Using Phillips #00 screwdriver, remove two 4.4 mm screws outside and two 4.4mm screws inside the door.

Step 5

Gently pull the outer front case from the camera.
It should fall apart easily if all screws are removed.

Gently pull the outer front case from the camera.

It should fall apart easily if all screws are removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors

                    Danielle Trivett

Member since: 11/04/2019

337 Reputation

                                      3 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       IUPUI, Team S1-G6, Henning Fall 2019                        

                                                  Member of IUPUI, Team S1-G6, Henning Fall 2019 



                    IUPUI-HENNING-F19S1G6                     


                                            3 Members                     


                                            6 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team