Difficulty
Difficult
Steps
2
Time Required
20 minutes
Sections
1
- Power Switch
- 2 steps
Flags
Missed a Step
Oops! This guide is currently missing some important steps.
BackSony Alpha A350
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Power Switch
- Identify and unscrew the ten PH000 screws around the top, front, left, and right sides of the camera body.
- Screws are very small, can be difficult to remove, and easy to lose.
Identify and unscrew the ten PH000 screws around the top, front, left, and right sides of the camera body.
Screws are very small, can be difficult to remove, and easy to lose.
1024
Step 2
- Slowly separate the back case from the camera.
- There may be a ribbon cable connecting the two pieces. Unlock the connector and remove the ribbon cable if necessary.
- Idenify and unscrew the two PH000 screws connecting the power switch.
- Remove the power switch.
Slowly separate the back case from the camera.
There may be a ribbon cable connecting the two pieces. Unlock the connector and remove the ribbon cable if necessary.
Idenify and unscrew the two PH000 screws connecting the power switch.
Remove the power switch.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Sydney Duncan
Member since: 10/10/2016
772 Reputation
5 Guides authored
Badges:
7
+4 more badges
Team
CJLADIES
Member of CJLADIES
Community
1 Member
10 Guides authored
