Difficulty
Moderate
Steps
5
Time Required
10 minutes
Sections
1
- LCD
- 5 steps
Flags
0
BackSony Alpha a7s II
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
LCD
- Orient the camera so that the LCD screen is facing you.
Orient the camera so that the LCD screen is facing you.
1024
Step 2
- Lift the LCD screen to unscrew the 2 screws on its underside.
Lift the LCD screen to unscrew the 2 screws on its underside.
Step 3
- Unscrew the 2 screws on the bottom of the LCD screen.
Unscrew the 2 screws on the bottom of the LCD screen.
Step 4
- Carefully remove the back of the LCD cover.
Carefully remove the back of the LCD cover.
Step 5
- Carefully pull up the LCD front cover from the metal internal frame.
- Be careful of the wire ribbon as it is fragile.
Carefully pull up the LCD front cover from the metal internal frame.
Be careful of the wire ribbon as it is fragile.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
7 other people completed this guide.
Author
with 2 other contributors
Jabari Montsho
Member since: 10/24/2018
391 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
University of South Florida St. Petersburg, Team S1-G2, Stowe Fall 2018
Member of University of South Florida St. Petersburg, Team S1-G2, Stowe Fall 2018
USFSP-STOWE-F18S1G2
3 Members
11 Guides authored
timothee.ferreol - Feb 8, 2019
Reply
And the how do you change the LCD screen please ? How to remove it ?
Viro Films - Mar 20, 2019
Reply
I have the exact same question, I need to change the screen with flex cable as well. Thanks, there isn’t a lot of info on the a7s 2, it’s all a7r out there
Jean-Philippe Archibald - Sep 27, 2019
Reply
Hello. My LCD backlight stop working after water came into the camera (snow). With a flash light I was able to determine it is the backlight since I was able to detect some menu items on the screen. I bought a replacement LDC unit, my thinking was that the backlight itself was damaged and a new one would do the trick. After replacing the screen, I have the same probleme. So I suppose my problem come from deeper in the camera. The camera itself do not command the backlight to turn on. Is there something I can do? any more troubleshooting?
Thanks!
Alain Bucio - May 7, 2021
Reply
What size screws!?