Difficulty

Moderate

Steps

7

Time Required

                          7 minutes            

Sections

2

  • Diopter
  • 5 steps
  • Viewfinder Plate
  • 2 steps

Flags

0

  • BackSony Alpha a7s II

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Diopter               
  • Orient your camera so that you are looking at the posterior portion.

Orient your camera so that you are looking at the posterior portion.

1024

Step 2

  • Place each of your thumbs on the interior portions of the eyepiece cup, pressing down and pushing up.

Place each of your thumbs on the interior portions of the eyepiece cup, pressing down and pushing up.

Step 3

  • Slide the eyepiece off by carefully pulling it upward.
  • Be careful not to come into contact with the viewfinder lens as the lens can be easily scratched.

Slide the eyepiece off by carefully pulling it upward.

Be careful not to come into contact with the viewfinder lens as the lens can be easily scratched.

Step 4

  • Remove the screw from the middle of the diopter with the JIS #00 screwdriver.

Remove the screw from the middle of the diopter with the JIS #00 screwdriver.

Step 5

  • Remove the diopter with your hands. If the diopter is at all stuck you can use the pointed tweezers to help aid in the removal process.
  • Be careful not to let fingers or tweezers come into contact with the viewfinder lens as the lens can be easily scratched.

Remove the diopter with your hands. If the diopter is at all stuck you can use the pointed tweezers to help aid in the removal process.

Be careful not to let fingers or tweezers come into contact with the viewfinder lens as the lens can be easily scratched.

Step 6

              Viewfinder Plate               
  • Remove the 4 screws on the viewfinder plate with a JIS #00 screwdriver.

Remove the 4 screws on the viewfinder plate with a JIS #00 screwdriver.

Step 7

  • Carefully remove the plastic viewfinder plate from the camera.

Carefully remove the plastic viewfinder plate from the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Brittany Pourciau                     

Member since: 10/24/2018

259 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       University of South Florida St. Petersburg, Team S1-G2, Stowe Fall 2018                        

                                                  Member of University of South Florida St. Petersburg, Team S1-G2, Stowe Fall 2018 



                    USFSP-STOWE-F18S1G2                     


                                            3 Members                     


                                            11 Guides authored