Sony Alpha Ilce 6000 E Mount Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          3 minutes            

Sections

2

• Lens
• 3 steps
• E-mount Replacement
• 4 steps

Flags

0

• BackSony Alpha ILCE-6000

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Lens               

• Turn of camera by turning the switch to OFF.

Turn of camera by turning the switch to OFF.

1024

Step 2

• Use the finger, press and hold the release black circle button ( on the bottom ) next to the lens on the front of the camera.

Use the finger, press and hold the release black circle button ( on the bottom ) next to the lens on the front of the camera.

Step 3

• Using the left hand or the right hand to hold the camera body, other hand twist the lens counterclockwise and pull it off.
• Align the white dot of the lens to the white dot on the camera mount to completely replace.

Using the left hand or the right hand to hold the camera body, other hand twist the lens counterclockwise and pull it off.

Align the white dot of the lens to the white dot on the camera mount to completely replace.

Step 4

              E-mount Replacement               

• Locate the E-mount on the front of the camera

Locate the E-mount on the front of the camera

Step 5

• Take a Philips head 00 screw to remove the four of the 5.1mm screws located on the E-mount.

Take a Philips head 00 screw to remove the four of the 5.1mm screws located on the E-mount.

Step 6

• After removing the screws, pull off the E-mount metal ring gently and wiggle it until its free.
• Remove the plastic ring located under the metal ring.
• Do not remove the metal piece that is located behind the plastic ring.

After removing the screws, pull off the E-mount metal ring gently and wiggle it until its free.

Remove the plastic ring located under the metal ring.

Do not remove the metal piece that is located behind the plastic ring.

Step 7

• Replace the plastic E-mount ring with a new one.

Replace the plastic E-mount ring with a new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Yirga Yilma                     

Member since: 02/02/2017

221 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       UW Tacoma, Team 1-4, Rose Winter 2017                        

                                                  Member of UW Tacoma, Team 1-4, Rose Winter 2017 



                    UWT-ROSE-W17S1G4                     


                                            4 Members                     


                                            10 Guides authored