Difficulty

Moderate

Steps

11

Time Required

                          5 minutes

Sections

3

  • Top Panel
  • 5 steps
  • Back Panel
  • 4 steps
  • Control Wheel
  • 2 steps

Flags

0

  • BackSony Alpha NEX-C3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Top Panel
  • Turn the camera off by sliding the power switch.

Turn the camera off by sliding the power switch.

1024

Step 2

  • Use a Phillips head 000 screwdriver to remove the 4.0mm screw inside the USB port.

Use a Phillips head 000 screwdriver to remove the 4.0mm screw inside the USB port.

Step 3

  • Use a Phillips head 000 screwdriver to remove the one 4.0mm screw on the side opposite of the USB port near the shutter button.

Use a Phillips head 000 screwdriver to remove the one 4.0mm screw on the side opposite of the USB port near the shutter button.

Step 4

  • Open the flap at the top of the camera.
  • Use a Phillips head 000 screwdriver to remove the two 4.0mm screws inside.

Open the flap at the top of the camera.

Use a Phillips head 000 screwdriver to remove the two 4.0mm screws inside.

Step 5

  • Gently lift off the top panel with your hands.

Gently lift off the top panel with your hands.

Step 6

              Back Panel
  • Use a Phillips head 000 screwdriver to remove the 4.0mm screw at the side opposite of the USB port.

Use a Phillips head 000 screwdriver to remove the 4.0mm screw at the side opposite of the USB port.

Step 7

  • Use a Phillips head 000 screwdriver to remove the three 4.0mm screws on the bottom of the camera.

Use a Phillips head 000 screwdriver to remove the three 4.0mm screws on the bottom of the camera.

Step 8

  • Tilt up the LCD screen.
  • Use a Phillips head 000 screwdriver to remove the two coarse 4.0mm screws near the bottom of the camera.

Tilt up the LCD screen.

Use a Phillips head 000 screwdriver to remove the two coarse 4.0mm screws near the bottom of the camera.

Step 9

  • Gently pry off the back panel, by wiggling it around the LCD screen.

Gently pry off the back panel, by wiggling it around the LCD screen.

Step 10

              Control Wheel
  • Tilt up the LCD screen.
  • Grab the silver plate, and gently pry it up.

Grab the silver plate, and gently pry it up.

Step 11

  • Gently pinch blue ribbon cable, and pull it out of the port.

Gently pinch blue ribbon cable, and pull it out of the port.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors 


                    Jonathan Chen

Member since: 10/17/2017

660 Reputation

                                      6 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       UC Santa Barbara, Team S1-G1, Weedon Fall 2017                        

                                                  Member of UC Santa Barbara, Team S1-G1, Weedon Fall 2017 



                    UCSB-WEEDON-F17S1G1                     


                                            3 Members                     


                                            13 Guides authored