Difficulty

Moderate

Steps

3

Time Required

                          10 minutes

Sections

1

  • LCD Side Display
  • 3 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackSony AZ1VR

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              LCD Side Display
  • Remove the two screws on the bottom of the camera.
  • Remove the screw inside the battery door.
  • Once these are removed, slide the door out, and the small piece of plastic with the door.

Remove the two screws on the bottom of the camera.

Remove the screw inside the battery door.

Once these are removed, slide the door out, and the small piece of plastic with the door.

1024

Step 2

  • Grab the lens and pull the body out of the plastic, this will reveal the insides of the device.
  • You’ll see a screw on the top of the device, towards the front, remove this screw.
  • Pull the tabs on the bottom and top of the lens, and pull outward, this will remove the lens housing from the body.

Grab the lens and pull the body out of the plastic, this will reveal the insides of the device.

You’ll see a screw on the top of the device, towards the front, remove this screw.

Pull the tabs on the bottom and top of the lens, and pull outward, this will remove the lens housing from the body.

Step 3

  • Remove the screws connected to the silver metal plate.
  • Remove the plate by pulling the back up and pushing it towards the front.
  • Remove the screw directly above the LCD display.
  • Pull the plastic up gently, it will be connected by cables on the bottom.
  • Disconnect the cable going to the LCD display.

Remove the screws connected to the silver metal plate.

Remove the plate by pulling the back up and pushing it towards the front.

Remove the screw directly above the LCD display.

Pull the plastic up gently, it will be connected by cables on the bottom.

Disconnect the cable going to the LCD display.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Michael Martin

Member since: 03/08/2017

401 Reputation

                                      4 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UMass Dartmouth, Team S3-G5, Botvin Spring 2017                        

                                                  Member of UMass Dartmouth, Team S3-G5, Botvin Spring 2017 



                    UMASSD-BOTVIN-S17S3G5                     


                                            3 Members                     


                                            10 Guides authored