Difficulty

Moderate

Steps

3

Time Required

                          10 minutes

Sections

1

  • Lens O Ring
  • 3 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

  • BackSony AZ1VR

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Lens O Ring
  • Start by removing the two screws on the bottom, and the screw inside the battery room.
  • Once these are removed, slide the door out, and the small piece of plastic with the door.

Start by removing the two screws on the bottom, and the screw inside the battery room.

Once these are removed, slide the door out, and the small piece of plastic with the door.

1024

Step 2

  • Now, grab the lens and pull the body out of the plastic, this will reveal the insides of the device.
  • You’ll see a screw on the top of the device, towards the front, remove this screw.
  • Next pull the tabs on the bottom and top of the lens, and pull outward, this will remove the lens housing from the body.

Now, grab the lens and pull the body out of the plastic, this will reveal the insides of the device.

You’ll see a screw on the top of the device, towards the front, remove this screw.

Next pull the tabs on the bottom and top of the lens, and pull outward, this will remove the lens housing from the body.

Step 3

  • Next, you’ll see a white ring around the lens, slowly remove that ring without causing damage to the device.
  • Now put the new one in its place. Now reassemble the device, it’s all set to be used.

Next, you’ll see a white ring around the lens, slowly remove that ring without causing damage to the device.

Now put the new one in its place. Now reassemble the device, it’s all set to be used.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Michael Martin

Member since: 03/08/2017

401 Reputation

                                      4 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UMass Dartmouth, Team S3-G5, Botvin Spring 2017                        

                                                  Member of UMass Dartmouth, Team S3-G5, Botvin Spring 2017 



                    UMASSD-BOTVIN-S17S3G5                     


                                            3 Members                     


                                            10 Guides authored