Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

  • Microphones
  • 5 steps

Flags

3

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

  • BackSony AZ1VR

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Microphones
  • Start by removing the two screws on the bottom, and the screw inside the battery room. Once these are removed, slide the door out, and the small piece of plastic with the door. Now, grab the lens and pull the body out of the plastic, this will reveal the insides of the device.

Start by removing the two screws on the bottom, and the screw inside the battery room. Once these are removed, slide the door out, and the small piece of plastic with the door. Now, grab the lens and pull the body out of the plastic, this will reveal the insides of the device.

1024

Step 2

  • You’ll see a screw on the top of the device, towards the front, remove this screw. Next pull the tabs on the bottom and top of the lens, and pull outward, this will remove the lens housing from the body. Once removed, flip the device onto its side, leaving the LCD display facing up.

You’ll see a screw on the top of the device, towards the front, remove this screw. Next pull the tabs on the bottom and top of the lens, and pull outward, this will remove the lens housing from the body. Once removed, flip the device onto its side, leaving the LCD display facing up.

Step 3

  • Remove the screws connected to the silver metal plate, once done, remove the plate by pulling the back up and pushing it towards the front. Now remove the screw directly above the LCD display, this will loosen the plastic up. Pull the plastic up gently, it will be connected by cables on the bottom.

Remove the screws connected to the silver metal plate, once done, remove the plate by pulling the back up and pushing it towards the front. Now remove the screw directly above the LCD display, this will loosen the plastic up. Pull the plastic up gently, it will be connected by cables on the bottom.

Step 4

  • This will reveal the thick cable, carefully pull this cable towards the front. Next remove one last screw on the top of the device, and slowly pull the lens out. You’ll notice that the microphone is still connected to the lens, just pop these out and the lens is off.

This will reveal the thick cable, carefully pull this cable towards the front. Next remove one last screw on the top of the device, and slowly pull the lens out. You’ll notice that the microphone is still connected to the lens, just pop these out and the lens is off.

Step 5

  • Next unsolder the microphone cables from the board. This will only take a few moments. Once completed put the new cables in the same place and resolder.

Next unsolder the microphone cables from the board. This will only take a few moments. Once completed put the new cables in the same place and resolder.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Michael Martin

Member since: 03/08/2017

401 Reputation

                                      4 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UMass Dartmouth, Team S3-G5, Botvin Spring 2017                        

                                                  Member of UMass Dartmouth, Team S3-G5, Botvin Spring 2017 



                    UMASSD-BOTVIN-S17S3G5                     


                                            3 Members                     


                                            10 Guides authored