Difficulty
Moderate
Steps
10
Time Required
15 minutes
Sections
2
- Disc Assembly
- 7 steps
- Motherboard
- 3 steps
Flags
0
BackSony BDP BX350
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Disc Assembly
- Remove the three 10mm Philips head screws on the back of the player.
Remove the three 10mm Philips head screws on the back of the player.
1024
Step 2
- Using an opening tool lift up the tabs located on the bottom of the plastic front cover.
Using an opening tool lift up the tabs located on the bottom of the plastic front cover.
Step 3
- Lift the tabs located on each side of the device to free the front cover. Begin to separate the front and metal back covers.
Lift the tabs located on each side of the device to free the front cover. Begin to separate the front and metal back covers.
Step 4
- Completely separate the front cover and the metal back cover from the grey casing.
- The inner components should all be completely exposed after opening.
Completely separate the front cover and the metal back cover from the grey casing.
The inner components should all be completely exposed after opening.
Step 5
- Unscrew the two 8mm Philips head screws securing the disc assembly to the main casing.
Unscrew the two 8mm Philips head screws securing the disc assembly to the main casing.
Step 6
- Pull the disc assembly out from under the metal tabs on the main casing.
Pull the disc assembly out from under the metal tabs on the main casing.
Step 7
- Remove disc assembly.
Remove disc assembly.
Step 8
Motherboard
- Do not bend or tear the ribbon cable.
- Remove all five ribbon cables from the motherboard.
Do not bend or tear the ribbon cable.
Remove all five ribbon cables from the motherboard.
Step 9
- Unscrew 3mm Philips head HDMI screw from metal casing.
Unscrew 3mm Philips head HDMI screw from metal casing.
Step 10
- Unscrew the three 5mm Philips head screws from motherboard.
- Separate the motherboard from the metal casing by pulling directly up. Use an opening tool if necessary.
Unscrew the three 5mm Philips head screws from motherboard.
Separate the motherboard from the metal casing by pulling directly up. Use an opening tool if necessary.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Kristen Vezina
Member since: 03/06/2017
413 Reputation
4 Guides authored
Badges:
7
+4 more badges
Team
UMass Dartmouth, Team S8-G5, Catania Spring 2017
Member of UMass Dartmouth, Team S8-G5, Catania Spring 2017
UMASSD-CATANIA-S17S8G5
3 Members
5 Guides authored
