Difficulty

Moderate

Steps

10

Time Required

                          15 minutes

Sections

2

  • Control Board
  • 7 steps
  • Wifi Card
  • 3 steps

Flags

0

  • BackSony BDP BX350

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Control Board
  • Remove the three 10mm Philips head screws on the back of the player.

Remove the three 10mm Philips head screws on the back of the player.

1024

Step 2

  • Using an opening tool lift up the tabs located on the bottom of the plastic front cover.

Using an opening tool lift up the tabs located on the bottom of the plastic front cover.

Step 3

  • Lift the tabs located on each side of the device to free the front cover. Begin separating the two covers from metal casing.

Lift the tabs located on each side of the device to free the front cover. Begin separating the two covers from metal casing.

Step 4

  • Remove both covers.

Remove both covers.

Step 5

  • Do not bend or tear the ribbon cable.
  • Using the plastic tweezers, carefully remove the ribbon cable from the motherboard.

Do not bend or tear the ribbon cable.

Using the plastic tweezers, carefully remove the ribbon cable from the motherboard.

Step 6

  • Unscrew the one 5mm Phillips head screw from the front of the device board.

Unscrew the one 5mm Phillips head screw from the front of the device board.

Step 7

  • Do not bend or tear ribbon cable.
  • Carefully separate the device control board from the metal casing.

Do not bend or tear ribbon cable.

Carefully separate the device control board from the metal casing.

Step 8

              Wifi Card
  • Remove 6mm Philips head screw from wifi board.

Remove 6mm Philips head screw from wifi board.

Step 9

  • Remove the ribbon cable from motherboard using a pair of tweezers.

Remove the ribbon cable from motherboard using a pair of tweezers.

Step 10

  • Do not bend or tear ribbon cable.
  • Carefully remove board and ribbon cables by pulling upwards then out to free it from the metal clips.

Carefully remove board and ribbon cables by pulling upwards then out to free it from the metal clips.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Kristen Vezina

Member since: 03/06/2017

413 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       UMass Dartmouth, Team S8-G5, Catania Spring 2017                        

                                                  Member of UMass Dartmouth, Team S8-G5, Catania Spring 2017 



                    UMASSD-CATANIA-S17S8G5                     


                                            3 Members                     


                                            5 Guides authored