Sony Bdp Bx520 Port Board Replacement Repair Guide

Difficulty

Moderate

Steps

11

Time Required

                          5 - 10 minutes            

Sections

3

• Disc Tray Cover
• 3 steps
• Front Panel
• 4 steps
• Port Board
• 4 steps

Flags

0

• BackSony BDP-BX520

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Disc Tray Cover               

• Plug in the Blu-Ray player, then press the power button, making sure the Blu-Ray player is powered on.
• Press the eject button on either the top of the Blu-Ray player or on the remote to open the disc tray.

Plug in the Blu-Ray player, then press the power button, making sure the Blu-Ray player is powered on.

Press the eject button on either the top of the Blu-Ray player or on the remote to open the disc tray.

1024

Step 2

• Grab the sides of the disc tray cover and carefully pull each side upwards, starting with the left side. This will unhook the cover from the tray.

Grab the sides of the disc tray cover and carefully pull each side upwards, starting with the left side. This will unhook the cover from the tray.

Step 3

• Close the disc tray, then power off and unplug the Blu-Ray player.

Close the disc tray, then power off and unplug the Blu-Ray player.

Step 4

              Front Panel               

• Insert the nylon or metal spudger under the clip on the side near the front of the device. Lift the clip so it is free from the device.
• Lifting these clips may require you to hold one clip open while you move on to the next clip.

Insert the nylon or metal spudger under the clip on the side near the front of the device. Lift the clip so it is free from the device.

Lifting these clips may require you to hold one clip open while you move on to the next clip.

Step 5

• Flip device over so the bottom faces you.
• Insert the nylon or metal spudger and lift the two clips on the bottom of the device.

Flip device over so the bottom faces you.

Insert the nylon or metal spudger and lift the two clips on the bottom of the device.

Step 6

• Lift the clip on the opposite side of the device with the nylon or metal spudger.

Lift the clip on the opposite side of the device with the nylon or metal spudger.

Step 7

• Grasp the front case firmly and lift from the rest of the device.
• Lifting may require some force.

Grasp the front case firmly and lift from the rest of the device.

Lifting may require some force.

Step 8

              Port Board               

• When handling circuit boards like the motherboard and port board, make sure to only touch them on the sides.
• Locate the large ribbon cable connecting the port board to the motherboard.
• Detach the cable from the motherboard by carefully pulling upward on the cable.

When handling circuit boards like the motherboard and port board, make sure to only touch them on the sides.

Locate the large ribbon cable connecting the port board to the motherboard.

Detach the cable from the motherboard by carefully pulling upward on the cable.

Step 9

• Using the Phillips #2 screwdriver, unscrew the silver, 8mm screw holding the board in place.

Using the Phillips #2 screwdriver, unscrew the silver, 8mm screw holding the board in place.

Step 10

• Using the nylon or metal spudger, carefully unclip the port board from the side of the player.

Using the nylon or metal spudger, carefully unclip the port board from the side of the player.

Step 11

• Carefully pull the port board free from the Blu-Ray player.

Carefully pull the port board free from the Blu-Ray player.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Collier                     

Member since: 01/31/2015

352 Reputation

                                      3 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Cal Poly, Team 8-41, Amido Winter 2015                        

                                                  Member of Cal Poly, Team 8-41, Amido Winter 2015 



                    CPSU-AMIDO-W15S8G41                     


                                            4 Members                     


                                            8 Guides authored