Difficulty

Moderate

Steps

3

Time Required

Suggest a time??

Sections

1

  • Outer Cover
  • 3 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackSony BDP-BX620

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Outer Cover               
  • Power on the device, eject the disk tray, and power off the device.
  • Turn the device over.
  • Lightly apply downward pressure on the black covering on the disk tray until it comes off.
  • Caution, applying too much pressure can break the black covering.

Power on the device, eject the disk tray, and power off the device.

Turn the device over.

Lightly apply downward pressure on the black covering on the disk tray until it comes off.

Caution, applying too much pressure can break the black covering.

1024

Step 2

  • Turn the device around.
  • Using a Phillips screw driver, remove the screws on both ends of the device circled red in the image.
  • Slide the side covers on either side towards the back of the device.
  • There is a back cover on either side of the device.

Turn the device around.

Using a Phillips screw driver, remove the screws on both ends of the device circled red in the image.

Slide the side covers on either side towards the back of the device.

There is a back cover on either side of the device.

Step 3

  • This step might require someone to help unclasping the plastic clips.
  • Turn the device so that the bottom is facing up.
  • In the bottom, unclip the three plastic clips circled in red.
  • On either side, unclip the plastic clip circled in red
  • Slide the black covering forwards to remove.
  • All five clips have to be unclasped for the covering to be removed.
  • Careful not to break the plastic clips when putting it back on.

This step might require someone to help unclasping the plastic clips.

Turn the device so that the bottom is facing up.

In the bottom, unclip the three plastic clips circled in red.

On either side, unclip the plastic clip circled in red

Slide the black covering forwards to remove.

All five clips have to be unclasped for the covering to be removed.

Careful not to break the plastic clips when putting it back on.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Axel Cruz Jimenez                     

Member since: 10/05/2016

207 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       USF Tampa, Team 1-6, Lacy Fall 2016                        

                                                  Member of USF Tampa, Team 1-6, Lacy Fall 2016 



                    USFT-LACY-F16S1G6                     


                                            4 Members                     


                                            6 Guides authored