Sony Bdp Bx620 Disk Drive Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

Suggest a time??

Sections

Outer Cover
3 steps
Disk Drive
3 steps

Flags

BackSony BDP-BX620
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Outer Cover

Power on the device, eject the disk tray, and power off the device.
Turn the device over.
Lightly apply downward pressure on the black covering on the disk tray until it comes off.
Caution, applying too much pressure can break the black covering.

Power on the device, eject the disk tray, and power off the device.

Turn the device over.

Lightly apply downward pressure on the black covering on the disk tray until it comes off.

Caution, applying too much pressure can break the black covering.

1024

Step 2

Turn the device around.
Using a Phillips screw driver, remove the screws on both ends of the device circled red in the image.
Slide the side covers on either side towards the back of the device.
There is a back cover on either side of the device.

Turn the device around.

Using a Phillips screw driver, remove the screws on both ends of the device circled red in the image.

Slide the side covers on either side towards the back of the device.

There is a back cover on either side of the device.

Step 3

This step might require someone to help unclasping the plastic clips.
Turn the device so that the bottom is facing up.
In the bottom, unclip the three plastic clips circled in red.
On either side, unclip the plastic clip circled in red
Slide the black covering forwards to remove.
All five clips have to be unclasped for the covering to be removed.
Careful not to break the plastic clips when putting it back on.

This step might require someone to help unclasping the plastic clips.

Turn the device so that the bottom is facing up.

In the bottom, unclip the three plastic clips circled in red.

On either side, unclip the plastic clip circled in red

Slide the black covering forwards to remove.

All five clips have to be unclasped for the covering to be removed.

Careful not to break the plastic clips when putting it back on.

Step 4

              Disk Drive

Remove the no-fuss ribbon cable connectors by gently pulling on them.
Pulling harshly may break the flat cables.

Remove the no-fuss ribbon cable connectors by gently pulling on them.

Pulling harshly may break the flat cables.

Step 5

Using the Phillips screw driver, remove the three screws.

Using the Phillips screw driver, remove the three screws.

Step 6

Turn the device over and use tweezers to push the metal clasp until it comes off.
Lift the metal brace located over the disk drive and remove the disk drive and the metal brace.

Turn the device over and use tweezers to push the metal clasp until it comes off.

Lift the metal brace located over the disk drive and remove the disk drive and the metal brace.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor

                    Axel Cruz Jimenez

Member since: 10/05/2016

207 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       USF Tampa, Team 1-6, Lacy Fall 2016                        

                                                  Member of USF Tampa, Team 1-6, Lacy Fall 2016 



                    USFT-LACY-F16S1G6                     


                                            4 Members                     


                                            6 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team