Difficulty
Moderate
Steps
7
Time Required
Suggest a time??
Sections
2
- Outer Cover
- 3 steps
- Power Module
- 4 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackSony BDP-BX620
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Outer Cover
- Power on the device, eject the disk tray, and power off the device.
- Turn the device over.
- Lightly apply downward pressure on the black covering on the disk tray until it comes off.
- Caution, applying too much pressure can break the black covering.
Power on the device, eject the disk tray, and power off the device.
Turn the device over.
Lightly apply downward pressure on the black covering on the disk tray until it comes off.
Caution, applying too much pressure can break the black covering.
1024
Step 2
- Turn the device around.
- Using a Phillips screw driver, remove the screws on both ends of the device circled red in the image.
- Slide the side covers on either side towards the back of the device.
- There is a back cover on either side of the device.
Turn the device around.
Using a Phillips screw driver, remove the screws on both ends of the device circled red in the image.
Slide the side covers on either side towards the back of the device.
There is a back cover on either side of the device.
Step 3
- This step might require someone to help unclasping the plastic clips.
- Turn the device so that the bottom is facing up.
- In the bottom, unclip the three plastic clips circled in red.
- On either side, unclip the plastic clip circled in red
- Slide the black covering forwards to remove.
- All five clips have to be unclasped for the covering to be removed.
- Careful not to break the plastic clips when putting it back on.
This step might require someone to help unclasping the plastic clips.
Turn the device so that the bottom is facing up.
In the bottom, unclip the three plastic clips circled in red.
On either side, unclip the plastic clip circled in red
Slide the black covering forwards to remove.
All five clips have to be unclasped for the covering to be removed.
Careful not to break the plastic clips when putting it back on.
Step 4
Power Module
- Gently pull on up on the power cord to unlatch it from the metal body of the device.
Gently pull on up on the power cord to unlatch it from the metal body of the device.
Step 5
- Remove the cable connecting the Power Port to the Motherboard by pulling up.
- It may be difficult to remove. Pull from the plastic part and not the wiring to prevent the wiring from breaking.
Remove the cable connecting the Power Port to the Motherboard by pulling up.
It may be difficult to remove. Pull from the plastic part and not the wiring to prevent the wiring from breaking.
Step 6
- Remove both screws using the Phillips screw driver.
Remove both screws using the Phillips screw driver.
Step 7
- Lift the Power Module up from the side. See picture.
- Pull up and away to remove the Power Module
Lift the Power Module up from the side. See picture.
Pull up and away to remove the Power Module
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Axel Cruz Jimenez
Member since: 10/05/2016
207 Reputation
3 Guides authored
Badges:
6
+3 more badges
Team
USF Tampa, Team 1-6, Lacy Fall 2016
Member of USF Tampa, Team 1-6, Lacy Fall 2016
USFT-LACY-F16S1G6
4 Members
6 Guides authored
