Difficulty

Moderate

Steps

11

Time Required

                          30 - 45 minutes

Sections

3

  • Sony BDP-S3200 Disassembly
  • 3 steps
  • Disk Drive Replacement
  • 5 steps
  • Disk Tray Belt
  • 3 steps

Flags

0

  • BackSony BDP-S3200

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Sony BDP-S3200 Disassembly
  • Remove all cables from the device.

Remove all cables from the device.

1024

Step 2

  • Use a #1 Phillips screwdriver to remove the three screws located in the back of the device.

Use a #1 Phillips screwdriver to remove the three screws located in the back of the device.

Step 3

  • Pull the top cover off by sliding back from the device once the screws have been taken out.

Pull the top cover off by sliding back from the device once the screws have been taken out.

Step 4

              Disk Drive Replacement
  • Locate the disk drive

Locate the disk drive

Step 5

  • Lightly lift off the hook on both front rear side and the bottom of the device to remove the front panel

Lightly lift off the hook on both front rear side and the bottom of the device to remove the front panel

Step 6

  • Remove the two screws that attach the disk drive to the frame using a #1 Phillips screwdriver.

Remove the two screws that attach the disk drive to the frame using a #1 Phillips screwdriver.

Step 7

  • Carefully pull the (3) three bands off vertically.
  • NOTE: There is a latch that needs to be lifted off before pulling the band out for the middle band.

Carefully pull the (3) three bands off vertically.

NOTE: There is a latch that needs to be lifted off before pulling the band out for the middle band.

Step 8

  • Lift the disk drive off of the device

Lift the disk drive off of the device

Step 9

              Disk Tray Belt
  • Remove the top of the disk drive by gently lifting up on the four latches located on both sides of the disk drive while lifting upwards.
  • The latches are very thin and can break off easily so make sure to use caution when lifting them to remove the disk drive top.

Remove the top of the disk drive by gently lifting up on the four latches located on both sides of the disk drive while lifting upwards.

The latches are very thin and can break off easily so make sure to use caution when lifting them to remove the disk drive top.

Step 10

  • Slide out the disk tray.
  • If the disk tray does not come out easily don’t force it out this could break the gears that allow the tray to move. Gently lift the disk tray upwards while sliding it out.

Slide out the disk tray.

If the disk tray does not come out easily don’t force it out this could break the gears that allow the tray to move. Gently lift the disk tray upwards while sliding it out.

Step 11

  • Remove the disc tray belt.

Remove the disc tray belt.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Eneida Montalban

Member since: 10/03/2017

173 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       USF Tampa, Team S5-G2, Walkup Fall 2017                        

                                                  Member of USF Tampa, Team S5-G2, Walkup Fall 2017 



                    USFT-WALKUP-F17S5G2                     


                                            5 Members                     


                                            3 Guides authored