Sony Bdp S3500 Wi Fi Module Replacement Repair Guide

Difficulty

Easy

Steps

9

Time Required

                          10 - 15 minutes            

Sections

3

• Front Panel
• 3 steps
• Port Board
• 3 steps
• Wi-Fi Module
• 3 steps

Flags

1

Inconsistent Images

Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.

• BackSony BDP-S3500

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Be sure to review the troubleshooting guide, as most of the time the problems are due malfunctioning software rather than it being a hardware issue.

What you need

Step 1

              Front Panel               

• Use the Phillips #2 screwdriver to remove the two 9mm screws located on the back of the device.

Use the Phillips #2 screwdriver to remove the two 9mm screws located on the back of the device.

1024

Step 2

• Slide the top panel off towards the back of the device.
• Remove the top panel.

Slide the top panel off towards the back of the device.

Remove the top panel.

Step 3

• Unclip the plastic tags from the bottom of the device.
• Unclip the plastic tags from the sides of the device.
• Slide the front panel off.

Unclip the plastic tags from the bottom of the device.

Unclip the plastic tags from the sides of the device.

Slide the front panel off.

Step 4

              Port Board               

• Keep the back side up and facing towards you.
• Carefully disconnect the blue ribbon connecting the port board and motherboard.
• Be delicate while removing the ribbon.

Keep the back side up and facing towards you.

Carefully disconnect the blue ribbon connecting the port board and motherboard.

Be delicate while removing the ribbon.

Step 5

• Use a Phillips #2 screwdriver to remove the 9mm screw from the port board.

Use a Phillips #2 screwdriver to remove the 9mm screw from the port board.

Step 6

• Remove the port board from the device.

Remove the port board from the device.

Step 7

              Wi-Fi Module               

• Remove the white ribbon cable connecting the Wi-Fi module to the motherboard by gently pulling it out.

Remove the white ribbon cable connecting the Wi-Fi module to the motherboard by gently pulling it out.

Step 8

• Use a Phillips #2 screwdriver to remove the 7mm screw from the Wi-Fi module.

Use a Phillips #2 screwdriver to remove the 7mm screw from the Wi-Fi module.

Step 9

• The Wi-Fi module can now be safely removed.

The Wi-Fi module can now be safely removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Bushra Banuso                     

Member since: 01/22/2020

97 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       York University, Team S8-G4, Turner Winter 2020                        

                                                  Member of York University, Team S8-G4, Turner Winter 2020 



                    YORK-TURNER-W20S8G4                     


                                            4 Members                     


                                            5 Guides authored