Sony Bdp S7200 Front Panel Cover Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          8 - 10 minutes            

Sections

2

• Back Cover
• 4 steps
• Front Panel Cover
• 4 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackSony BDP-S7200

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Back Cover               

• Remove the disk tray cover from the device.

Remove the disk tray cover from the device.

1024

Step 2

• Using the Phillips #2 Screwdriver, remove the five 9mm from the bottom of the device.
• Remove the metal cover.

Using the Phillips #2 Screwdriver, remove the five 9mm from the bottom of the device.

Remove the metal cover.

Step 3

• Using the Phillips #2 Screwdriver, remove the six 9mm screws from the back of the device.

Using the Phillips #2 Screwdriver, remove the six 9mm screws from the back of the device.

Step 4

• Pull off the back panel and remove it from the device.

Pull off the back panel and remove it from the device.

Step 5

              Front Panel Cover               

• Using the plastic opening tool, open one of the tabs on the bottom of the device.
• While keeping the tab open, insert a opening pick in between the opening tool and tab.
• Repeat this for the 3 other tabs.

Using the plastic opening tool, open one of the tabs on the bottom of the device.

While keeping the tab open, insert a opening pick in between the opening tool and tab.

Repeat this for the 3 other tabs.

Step 6

• Place your hands on the two black circles on the bottom of the device.
• Pull on the black circles to remove the device from its front panel cover.

Place your hands on the two black circles on the bottom of the device.

Pull on the black circles to remove the device from its front panel cover.

Step 7

• Using the Phillips #2 Screwdriver, remove the seven 9mm screws from the top of the device.
• Using the same screwdriver, remove the three 9mm screws from the back of the device.
• Using the same screwdriver, remove the one 9mm screw still connecting the small metal clip to the front of the device.

Using the Phillips #2 Screwdriver, remove the seven 9mm screws from the top of the device.

Using the same screwdriver, remove the three 9mm screws from the back of the device.

Using the same screwdriver, remove the one 9mm screw still connecting the small metal clip to the front of the device.

Step 8

• Remove the small metal clip on the front of the device.
• Remove the metal cover on the top of the device.

Remove the small metal clip on the front of the device.

Remove the metal cover on the top of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Mitchell Novak                     

Member since: 01/16/2020

760 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       Embry-Riddle Aeronautical University, Team 1-1, Rauch Summer 2022                        

                                                  Member of Embry-Riddle Aeronautical University, Team 1-1, Rauch Summer 2022 



                    ERAU-RAUCH-SU22S1G1                     


                                            3 Members                     


                                            5 Guides authored