Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
2
- How To Open The Device
- 2 steps
- Battery
- 1 step
Flags
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Markup Mishap
This guide needs better markups. Help out by correcting or making some markup annotations.
BackSony BDP-SX1000
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
How To Open The Device
- Flip the Sony BDP-SX1000 over so that the underside is facing up.
- Remove the four 2mm Phillips #0 screws at the top of the device.
- Remove the rest of the J0mm Phillips #0 screws from the device.
Flip the Sony BDP-SX1000 over so that the underside is facing up.
Remove the four 2mm Phillips #0 screws at the top of the device.
Remove the rest of the J0mm Phillips #0 screws from the device.
1024
Step 2
- Take out the seals at the bottom and at the corners with edge of screwdriver. Remove the J0mm Phillips #0 screws under the seals.
- Remove the back lid of the Sony BDP-SX1000 so that you can now see the inside of the device. The two lids are attached by two wires. The small wire on right side of the top lid goes on right side of bottom lid or on the black connector. The big wire on left side of the top lid goes on left side of the bottom lid or on white connector.
Take out the seals at the bottom and at the corners with edge of screwdriver. Remove the J0mm Phillips #0 screws under the seals.
Remove the back lid of the Sony BDP-SX1000 so that you can now see the inside of the device. The two lids are attached by two wires. The small wire on right side of the top lid goes on right side of bottom lid or on the black connector. The big wire on left side of the top lid goes on left side of the bottom lid or on white connector.
Step 3
Battery
- The battery can be found at the bottom of the device.
- Remove the battery by removing the white connector.
The battery can be found at the bottom of the device.
Remove the battery by removing the white connector.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Marcos Arguello-Gonzalez
Member since: 10/22/2018
353 Reputation
3 Guides authored
Badges:
4
+1 more badge
Team
UC Davis, Team S4-G2, Lore Fall 2018
Member of UC Davis, Team S4-G2, Lore Fall 2018
UCD-LORE-F18S4G2
3 Members
3 Guides authored
ledude71 - Oct 15, 2020
Reply
Any one know where to find replacement batteries?