Sony Betamovie Bmc 220 Cassette Compartment Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

Battery
3 steps
Cassette Compartment
3 steps

Flags

BackSony Betamovie BMC-220
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Orient your Betamovie so that the back of the device is sitting flat, and the bottom of the device is facing you.
Slide the RELEASE switch up to bring the hand drip down.

Orient your Betamovie so that the back of the device is sitting flat, and the bottom of the device is facing you.

Slide the RELEASE switch up to bring the hand drip down.

1024

Step 2

Turn the BATTERY knob to OPEN, and open the lid.
Reminder: When inserting a new battery, make sure the knob is turned to OPEN.
Be careful not to point the hand grip down when turning the BATTERY knob. The battery pack may fall out.

Turn the BATTERY knob to OPEN, and open the lid.

Reminder: When inserting a new battery, make sure the knob is turned to OPEN.

Be careful not to point the hand grip down when turning the BATTERY knob. The battery pack may fall out.

Step 3

Remove the battery from the Betamovie.

Remove the battery from the Betamovie.

Step 4

              Cassette Compartment

Remove the two screws (2mm x 6mm) at the base of the Cassette compartment using the Phillips #1 screwdriver.
Remove the two screws (2mm x 6mm) at the back of the Betamovie using the Phillips #2 screwdriver.
Once all of the screws are removed, pop the cassette cover off of the camera.

Remove the two screws (2mm x 6mm) at the base of the Cassette compartment using the Phillips #1 screwdriver.

Remove the two screws (2mm x 6mm) at the back of the Betamovie using the Phillips #2 screwdriver.

Once all of the screws are removed, pop the cassette cover off of the camera.

Step 5

Remove the silver piece at the top of the Betamovie using your hands.
Remove the two screws (2mm x 6mm) under the flat silver piece using the Phillips #1 screwdriver. The silver metal clip comes off once the crews are removed.

Remove the silver piece at the top of the Betamovie using your hands.

Remove the two screws (2mm x 6mm) under the flat silver piece using the Phillips #1 screwdriver. The silver metal clip comes off once the crews are removed.

Step 6

Remove the two screws (2mm x 6mm) underneath the cassette compartment on the bottom of the Betamovie with the Phillips #1 screwdriver.
Remove the bottom piece of the cassette compartment.

Remove the two screws (2mm x 6mm) underneath the cassette compartment on the bottom of the Betamovie with the Phillips #1 screwdriver.

Remove the bottom piece of the cassette compartment.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Mary McLaughlin

Member since: 09/10/2018

198 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       University of Alabama, Team S2-G5, Bedsole Fall 2018                        

                                                  Member of University of Alabama, Team S2-G5, Bedsole Fall 2018 



                    UA-BEDSOLE-F18S2G5                     


                                            3 Members                     


                                            8 Guides authored

Kyle Gilchrist - Jul 24, 2020

Do you know how to take out the Trinicon tube in this camera?

Introduction#

What you need#

Team#

Introduction

What you need

Team