Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

1

  • Motor Belt
  • 5 steps

Flags

4

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackToca-fitas Sony KE200

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Step 1

              Motor Belt
  • Remove the screws from the bottom.
  • Remove the screws from the side.
  • Carefully remove the cassette deck from the metal base.

Remove the screws from the bottom.

Remove the screws from the side.

Carefully remove the cassette deck from the metal base.

1024

Step 2

  • Remove the black cable on the left side.
  • Remove the white flat ribbon cables.
  • Remove the small screw in order to change the ruble inside the cassette player mechanisms.
  • Remove the gray power cables.

Remove the black cable on the left side.

Remove the white flat ribbon cables.

Remove the small screw in order to change the ruble inside the cassette player mechanisms.

Remove the gray power cables.

Step 3

  • Remove the small screw.
  • Now you should be able to see the wheel location. Change the rubber.

Remove the small screw.

Now you should be able to see the wheel location. Change the rubber.

Step 4

  • Replace the big belt.
  • Replace the small (green) belt.
  • Use a little tape to hold the belt. When closing, remove the tape.

Replace the big belt.

Replace the small (green) belt.

Use a little tape to hold the belt. When closing, remove the tape.

Step 5

Insert the small screw and close the cassette player with new straps.

Connect all cables and flat, white ribbon cables.

Close everything up and you’re done with the repair!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

        These translators are helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Tay

jeremyfitz

shingle

Udo Baingo

Author

                                      with 2 other contributors 


                    Cafony

Member since: 02/17/2015

618 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges