Difficulty
Moderate
Steps
5
Time Required
10 - 15 minutes
Sections
1
- Front Panel
- 5 steps
Flags
0
BackSony CDX-GT540UI
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Before any repair work can be done, one must remove the device from the vehicle. To do so follow this link to see a vehicle general removal of a stereo system.
What you need
Step 1
Front Panel
- Locate face-plate eject button.
Locate face-plate eject button.
1024
Step 2
- Press the eject button.
- Remove the face-plate.
Press the eject button.
Remove the face-plate.
Step 3
- Remove two 4.9mm Phillips #00screws on the front of the device.
- Remove two 7.5mm Phillips #00screws on the front of the device.
- When the screws are removed, the eject lever may fall into the device. Make sure the device is held horizontal and level.
Remove two 4.9mm Phillips #00screws on the front of the device.
Remove two 7.5mm Phillips #00screws on the front of the device.
When the screws are removed, the eject lever may fall into the device. Make sure the device is held horizontal and level.
Step 4
- Rotate device 90 degrees to either side.
- Use the plastic opening tool to pry open the top and bottom tab respectively.
- Repeat on opposite side.
Rotate device 90 degrees to either side.
Use the plastic opening tool to pry open the top and bottom tab respectively.
Repeat on opposite side.
Step 5
- Remove front panel.
Remove front panel.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Odelkys Marquez
Member since: 09/22/2014
1,067 Reputation
7 Guides authored
Badges:
14
+11 more badges
Team
USF Tampa, Team 10-2, Brown Fall 2014
Member of USF Tampa, Team 10-2, Brown Fall 2014
USFT-BROWN-F14S10G2
3 Members
7 Guides authored
