Difficulty
Moderate
Steps
5
Time Required
8 minutes
Sections
2
- Battery
- 2 steps
- Front Panel
- 3 steps
Flags
0
BackSony CFD-8
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the battery cover on the back of the boombox by applying downward pressure to the two clamps.
- Be sure to unplug the boombox from the wall before attempting to open it for repair.
Remove the battery cover on the back of the boombox by applying downward pressure to the two clamps.
Be sure to unplug the boombox from the wall before attempting to open it for repair.
1024
Step 2
- Push against the positive end of each battery. Once it is loose, lift the battery out. Repeat for all six batteries.
- The top row of batteries have the positive side pointing right. The bottom row of batteries have the positive side pointing left.
Push against the positive end of each battery. Once it is loose, lift the battery out. Repeat for all six batteries.
The top row of batteries have the positive side pointing right. The bottom row of batteries have the positive side pointing left.
Step 3
Front Panel
- Hold the boombox handle at an angle to access the screws behind the CD player.
- Use a Phillips #1 screwdriver to unscrew the top two 14 mm screws. You may need a flashlight to see the screws.
Hold the boombox handle at an angle to access the screws behind the CD player.
Use a Phillips #1 screwdriver to unscrew the top two 14 mm screws. You may need a flashlight to see the screws.
Step 4
- Remove four 14 mm screws using a Phillips #1 screwdriver. Two of these screws are at the bottom of the boombox and the other two are on either side of the boombox as highlighted in the related images.
- All four screws have black arrows (not visible in the photo) indicating their location on the boombox.
Remove four 14 mm screws using a Phillips #1 screwdriver. Two of these screws are at the bottom of the boombox and the other two are on either side of the boombox as highlighted in the related images.
All four screws have black arrows (not visible in the photo) indicating their location on the boombox.
Step 5
- Gently separate the front panel from the back panel.
- Remove the two connections holding the front panel to boombox.
- One connection is located on the upper left hand side of the main circuit board.
- The other is a large white strip slightly to the right of the cassette player.
- Do not touch the cylindrical parts on the circuit board. These are capacitors and may deliver a shock!
- Remove the front panel.
Gently separate the front panel from the back panel.
Remove the two connections holding the front panel to boombox.
One connection is located on the upper left hand side of the main circuit board.
The other is a large white strip slightly to the right of the cassette player.
Do not touch the cylindrical parts on the circuit board. These are capacitors and may deliver a shock!
Remove the front panel.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 7 other contributors
Andrew Kleve
Member since: 10/12/2014
271 Reputation
2 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team 10-38, Amido Fall 2014
Member of Cal Poly, Team 10-38, Amido Fall 2014
CPSU-AMIDO-F14S10G38
5 Members
7 Guides authored
