Difficulty

Easy

Steps

5

Time Required

                          8 minutes

Sections

2

  • Front Panel
  • 3 steps
  • Speaker
  • 2 steps

Flags

1

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackSony CFD-8

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Panel
  • Hold the boombox handle at an angle to access the screws behind the CD player.
  • Use a Phillips #1 screwdriver to unscrew the top two 14 mm screws. You may need a flashlight to see the screws.

Hold the boombox handle at an angle to access the screws behind the CD player.

Use a Phillips #1 screwdriver to unscrew the top two 14 mm screws. You may need a flashlight to see the screws.

1024

Step 2

  • Remove four 14 mm screws using a Phillips #1 screwdriver. Two of these screws are at the bottom of the boombox and the other two are on either side of the boombox as highlighted in the related images.
  • All four screws have black arrows (not visible in the photo) indicating their location on the boombox.

Remove four 14 mm screws using a Phillips #1 screwdriver. Two of these screws are at the bottom of the boombox and the other two are on either side of the boombox as highlighted in the related images.

All four screws have black arrows (not visible in the photo) indicating their location on the boombox.

Step 3

  • Gently separate the front panel from the back panel.
  • Remove the two connections holding the front panel to boombox.
  • One connection is located on the upper left hand side of the main circuit board.
  • The other is a large white strip slightly to the right of the cassette player.
  • Do not touch the cylindrical parts on the circuit board. These are capacitors and may deliver a shock!
  • Remove the front panel.

Gently separate the front panel from the back panel.

Remove the two connections holding the front panel to boombox.

One connection is located on the upper left hand side of the main circuit board.

The other is a large white strip slightly to the right of the cassette player.

Do not touch the cylindrical parts on the circuit board. These are capacitors and may deliver a shock!

Remove the front panel.

Step 4

              Speaker
  • Use a 14cm Phillips #1 screwdriver to remove the four respective screws attaching the left and right speakers to the front panel.

Use a 14cm Phillips #1 screwdriver to remove the four respective screws attaching the left and right speakers to the front panel.

Step 5

  • Remove the speakers from the front panel.

Remove the speakers from the front panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 2 other contributors 


                    Liam Kirsh

Member since: 10/14/2014

197 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 10-38, Amido Fall 2014                        

                                                  Member of Cal Poly, Team 10-38, Amido Fall 2014 



                    CPSU-AMIDO-F14S10G38                     


                                            5 Members                     


                                            7 Guides authored