Difficulty
Easy
Steps
3
Time Required
3 - 5 minutes
Sections
1
- Back Panel
- 3 steps
Flags
0
BackSony Cyber-Shot DSC-H1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Power down the camera and remove the batteries.
Power down the camera and remove the batteries.
1024
Step 2
- Using a Phillips #0 screwdriver, remove all of the screws from the back panel casing.
- There are six 5.22mm long, 3.00mm head diameter screws total.
- The left side is not shown but there should be 1 screw on that side.
Using a Phillips #0 screwdriver, remove all of the screws from the back panel casing.
There are six 5.22mm long, 3.00mm head diameter screws total.
The left side is not shown but there should be 1 screw on that side.
Step 3
- Remove the back casing.
- The casing itself is sturdy so don’t be afraid to remove it forcefully.
Remove the back casing.
The casing itself is sturdy so don’t be afraid to remove it forcefully.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Trystan Jasperson
Member since: 03/17/2018
231 Reputation
2 Guides authored
Badges:
4
+1 more badge
Team
Baylor, Team S5-G4, Williams Spring 2018
Member of Baylor, Team S5-G4, Williams Spring 2018
BU-WILLIAMS-S18S5G4
3 Members
10 Guides authored
