Sony Cyber Shot Dsc H20 Flash Assembly Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

1

• Flash Assembly
• 8 steps

Flags

3

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackSony Cyber-shot DSC-H20

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Flash Assembly               

• Slide open the battery cover and remove the battery and the Memory Stick Duo.
• Return the battery cover to its closed position.

Slide open the battery cover and remove the battery and the Memory Stick Duo.

Return the battery cover to its closed position.

1024

Step 2

• Remove all three screws from the bottom of the camera.

Remove all three screws from the bottom of the camera.

Step 3

• Remove the screws on the left and right sides of the camera.

Remove the screws on the left and right sides of the camera.

Step 4

• Press down on the flash cover to raise the flash.
• Remove both screws that hold the flash cover to the body of the camera.

Press down on the flash cover to raise the flash.

Remove both screws that hold the flash cover to the body of the camera.

Step 5

• Place the camera upside down with the battery port positioned upward.
• Slide open the battery port.

Place the camera upside down with the battery port positioned upward.

Slide open the battery port.

Step 6

• Pry the front cover of the camera off with the plastic opening tool.

Pry the front cover of the camera off with the plastic opening tool.

Step 7

• Remove the power shutter unit

Remove the power shutter unit

Step 8

• Unscrew the screw located at the back left corner of the flash component.
• Set the flash component aside.

Unscrew the screw located at the back left corner of the flash component.

Set the flash component aside.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Reuben Martinez                     

Member since: 02/23/2015

333 Reputation

                                      2 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       USF Tampa, Team 1-1, Leahy Winter 2015                        

                                                  Member of USF Tampa, Team 1-1, Leahy Winter 2015 



                    USFT-LEAHY-W15S1G1                     


                                            3 Members                     


                                            10 Guides authored                     

aloke mondal - Jun 14, 2019

Reply

how to bye power sutter unit