Difficulty

Moderate

Steps

11

Time Required

Suggest a time??

Sections

1

  • Lens Assembly
  • 11 steps

Flags

3

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackSony Cyber-shot DSC-H20

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Lens Assembly
  • Slide open the battery cover and remove the battery and the Memory Stick Duo.
  • Return the battery cover to its closed position.

Slide open the battery cover and remove the battery and the Memory Stick Duo.

Return the battery cover to its closed position.

1024

Step 2

  • Remove all three screws from the bottom of the camera.

Remove all three screws from the bottom of the camera.

Step 3

  • Remove the screws on the left and right sides of the camera.

Remove the screws on the left and right sides of the camera.

Step 4

  • Press down on the flash cover to raise the flash.
  • Remove both screws that hold the flash cover to the body of the camera.

Press down on the flash cover to raise the flash.

Remove both screws that hold the flash cover to the body of the camera.

Step 5

  • Place the camera upside down with the battery port positioned upward and the battery port open.

Place the camera upside down with the battery port positioned upward and the battery port open.

Step 6

  • Pry the front cover of the camera off with the plastic opening tool.

Pry the front cover of the camera off with the plastic opening tool.

Step 7

  • Remove the power shutter unit

Remove the power shutter unit

Step 8

  • Unscrew the screw located at the back left corner of the flash component.
  • Set the flash component aside.

Unscrew the screw located at the back left corner of the flash component.

Set the flash component aside.

Step 9

  • Lift up the gray plastic facing in order to uncover the motherboard and the ribbon cable ports.

Lift up the gray plastic facing in order to uncover the motherboard and the ribbon cable ports.

Step 10

  • Carefully flip up the three black clasps holding the lens cables to the motherboard.
  • Slide the cables from the ports.

Carefully flip up the three black clasps holding the lens cables to the motherboard.

Slide the cables from the ports.

Step 11

  • Lift the lens and attached ribbon cables from the camera in order to switch this lens with a new one.

Lift the lens and attached ribbon cables from the camera in order to switch this lens with a new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Rachel Payne

Member since: 02/23/2015

386 Reputation

                                      2 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges

Team

                       USF Tampa, Team 1-1, Leahy Winter 2015                        

                                                  Member of USF Tampa, Team 1-1, Leahy Winter 2015 



                    USFT-LEAHY-W15S1G1                     


                                            3 Members                     


                                            10 Guides authored