Sony Cyber Shot Dsc H20 Screen Replacement Repair Guide

Difficulty

Moderate

Steps

12

Time Required

Suggest a time??

Sections

1

• Screen
• 12 steps

Flags

3

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackSony Cyber-shot DSC-H20

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Screen               

• Slide open the battery cover and remove the battery and the Memory Stick Duo.
• Return the battery cover to its closed position.

Slide open the battery cover and remove the battery and the Memory Stick Duo.

Return the battery cover to its closed position.

1024

Step 2

• Remove all three screws from the bottom of the camera.

Remove all three screws from the bottom of the camera.

Step 3

• Remove the screws on the left and right sides of the camera.

Remove the screws on the left and right sides of the camera.

Step 4

• Press down on the flash cover to raise the flash.
• Remove both screws that hold the flash cover to the body of the camera.

Press down on the flash cover to raise the flash.

Remove both screws that hold the flash cover to the body of the camera.

Step 5

• Place the camera upside down with the battery port positioned upward.
• Slide open the battery port.

Place the camera upside down with the battery port positioned upward.

Slide open the battery port.

Step 6

• Pry the front cover of the camera off with the plastic opening tool.

Pry the front cover of the camera off with the plastic opening tool.

Step 7

• Remove the power shutter unit.

Remove the power shutter unit.

Step 8

• Unscrew the screw located at the back left corner of the flash component.
• Set the flash component aside.

Unscrew the screw located at the back left corner of the flash component.

Set the flash component aside.

Step 9

• Remove the two screws from the bottom of the motherboard.

Remove the two screws from the bottom of the motherboard.

Step 10

• Use the plastic opening tool to assist you in separating the metal frame from the back cover of the camera.

Use the plastic opening tool to assist you in separating the metal frame from the back cover of the camera.

Step 11

• Flip the metal frame over to the left side of the camera and onto the surface on which you are working.

Flip the metal frame over to the left side of the camera and onto the surface on which you are working.

Step 12

• Now remove the LCD screen by bringing the back cover over to the left so that the LCD screen falls into your hand.

Now remove the LCD screen by bringing the back cover over to the left so that the LCD screen falls into your hand.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Rachel Payne                     

Member since: 02/23/2015

386 Reputation

                                      2 Guides authored                  



                       Badges:
                       17







                                                        +14 more badges                           

Team

                       USF Tampa, Team 1-1, Leahy Winter 2015                        

                                                  Member of USF Tampa, Team 1-1, Leahy Winter 2015 



                    USFT-LEAHY-W15S1G1                     


                                            3 Members                     


                                            10 Guides authored                     

ummejamil - Sep 21, 2018

Reply

Thank you so much. I could successfully open the camera and got the LCD display out. But I couldn’t find out how to replace the LCD, I wanted to mean where to open the LCD cable?