Difficulty
Moderate
Steps
8
Time Required
4 minutes
Sections
3
- Rear Case
- 3 steps
- Screen
- 2 steps
- Flash
- 3 steps
Flags
0
BackSony Cyber-shot DSC-H300
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rear Case
- Remove the 6mm Phillips #000 screws.
Remove the 6mm Phillips #000 screws.
1024
Step 2
- Remove the five 6mm Phillips #000 screws.
- Remove the four 3mm Phillips #000 screws.
Remove the five 6mm Phillips #000 screws.
Remove the four 3mm Phillips #000 screws.
Step 3
- Use the flat end of a plastic spudger to pry apart the rear cover from the body of the camera.
Use the flat end of a plastic spudger to pry apart the rear cover from the body of the camera.
Step 4
Screen
- Remove the two 6mm Phillips #000 screws.
Remove the two 6mm Phillips #000 screws.
Step 5
- The screen will be loose so remove it.
The screen will be loose so remove it.
Step 6
Flash
- Remove the four 6mm Phillips #000 screws from the upper case of the camera.
- Remove the upper case.
Remove the four 6mm Phillips #000 screws from the upper case of the camera.
Remove the upper case.
Step 7
- Remove the four 6mm Phillips #000 screws from the bottom of the case.
Remove the four 6mm Phillips #000 screws from the bottom of the case.
Step 8
- Slide the flash out and away from the camera to remove.
Slide the flash out and away from the camera to remove.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Nassr Al Mandhari
Member since: 02/14/2018
115 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
USF Tampa, Team S1-G6, Nance Spring 2018
Member of USF Tampa, Team S1-G6, Nance Spring 2018
USFT-NANCE-S18S1G6
3 Members
10 Guides authored
