Sony Cyber Shot Dsc Hx100V Viewfinder Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          10 minutes            

Sections

1

• Viewfinder
• 6 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

• BackSony Cyber-shot DSC-HX100V

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Viewfinder               

• Make sure camera is turned off.
• Press the ON/Off button to turn off the camera.
• WARNING: Data may be lost if the camera remains on.

Make sure camera is turned off.

Press the ON/Off button to turn off the camera.

WARNING: Data may be lost if the camera remains on.

1024

Step 2

• Use the Phillips screwdriver size #00 to remove the 1.59mm #00 screws.
• Remove 2 screws from the side of the camera.
• Remove 4 screws on the bottom of the camera.
• Remove 1 screw next to the eyepiece.

Use the Phillips screwdriver size #00 to remove the 1.59mm #00 screws.

Remove 2 screws from the side of the camera.

Remove 4 screws on the bottom of the camera.

Remove 1 screw next to the eyepiece.

Step 3

• Flip the screen back to reveal 2 hidden screws.
• Remove the two 1.59mm #00 screws on the left with the Phillips #00 screwdriver.

Flip the screen back to reveal 2 hidden screws.

Remove the two 1.59mm #00 screws on the left with the Phillips #00 screwdriver.

Step 4

• Pull the back panel of the camera upward.
• Use a spudger to help pry open the back panel.

Pull the back panel of the camera upward.

Use a spudger to help pry open the back panel.

Step 5

• Open the back panel to view the inside of the camera.
• If the orange ribbon cable disconnects from its designated port, do not panic. The cable is easy to reinsert.

Open the back panel to view the inside of the camera.

If the orange ribbon cable disconnects from its designated port, do not panic. The cable is easy to reinsert.

Step 6

• Carefully pull out the the eyepiece.
• Detach the orange ribbon cable that connects it to the green panel by carefully pulling outwards.

Carefully pull out the the eyepiece.

Detach the orange ribbon cable that connects it to the green panel by carefully pulling outwards.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 4 other contributors 

                    DaQuawn                     

Member since: 03/05/2015

251 Reputation

                                      2 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       Sam Houston State, Team 11-3, Blackburne Winter 2015                        

                                                  Member of Sam Houston State, Team 11-3, Blackburne Winter 2015 



                    SHSU-BLACKBURNE-W15S11G3                     


                                            3 Members                     


                                            8 Guides authored                     

Satsara Gunaratne - Sep 18, 2018

Reply

Thank you very much for the importent articles made for us. If I can please put , how to replace the flasher as well.