Sony Cyber Shot Dsc Hx80 Lcd Screen Replacement Repair Guide

Difficulty

Difficult

Steps

5

Time Required

                          25 minutes            

Sections

1

• LCD Screen
• 5 steps

Flags

0

• BackSony Cyber-shot DSC-HX80

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              LCD Screen               

• Before disassembling any part of the camera, turn off the power by pressing down on the ON/OFF button. The ON/OFF button is located on top of the camera.

Before disassembling any part of the camera, turn off the power by pressing down on the ON/OFF button. The ON/OFF button is located on top of the camera.

1024

Step 2

• Open the compartment located at the bottom of the camera. Slide the LOCK/OPEN switch to the OPEN side. Locate the small blue tab on the side. Pull it in direction away from battery. Remove the battery and set it aside.

Open the compartment located at the bottom of the camera. Slide the LOCK/OPEN switch to the OPEN side. Locate the small blue tab on the side. Pull it in direction away from battery. Remove the battery and set it aside.

Step 3

• Flip LCD screen upwards.
• Use the PH000 Phillips head screwdriver to remove the two 0.3 mm Phillips black screws located on the sides of the LCD screen. Place screws on magnetic mat or plastic bag.

Flip LCD screen upwards.

Use the PH000 Phillips head screwdriver to remove the two 0.3 mm Phillips black screws located on the sides of the LCD screen. Place screws on magnetic mat or plastic bag.

Step 4

• Use the PH000 Phillips head screwdriver to remove the two additional 0.3 mm black Phillips screws located on the top edge of the LCD screen. Place screws on magnetic mat or plastic bag.

Use the PH000 Phillips head screwdriver to remove the two additional 0.3 mm black Phillips screws located on the top edge of the LCD screen. Place screws on magnetic mat or plastic bag.

Step 5

• Use a nylon spudger to gently remove the damaged LCD screen off the camera.
• Replace LCD screen with new one.

Use a nylon spudger to gently remove the damaged LCD screen off the camera.

Replace LCD screen with new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Gordon Jones                     

Member since: 10/02/2018

1,057 Reputation

                                      5 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       Sam Houston State, Team S11-G1, Blackburne Fall 2018                        

                                                  Member of Sam Houston State, Team S11-G1, Blackburne Fall 2018 



                    SHSU-BLACKBURNE-F18S11G1                     


                                            4 Members                     


                                            10 Guides authored                     

Dale Bjerning - May 21, 2019

Reply

You should note that there is a small rectangular magnet (perhaps 8mm long and 2mm across) that has to be placed at the top of the LCD directly under the flash switch. Otherwise the LCD image will be upside down.

Wolfina - Mar 17, 2022

Hello could you show a picture of where exactly under the flash has to be the magnetite tangle. Thanks.

Thorusofer Dragon Knight - Jul 21, 2020

Reply

Anyone know where I can find the cable from the screen to the camera?

ninjadawn25 - Mar 27, 2021

Reply

where can i find the screen other then threw sony