Sony Cyber Shot Dsc Hx90V Lens Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 - 20 minutes

Sections

Lens
12 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

BackSony Cyber-shot DSC-HX90V
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Button board

Place the device so bottom of the camera is facing up .
Remove the five marked screws with a Phillips #000 screwdriver.
Insert the spudger where arrow marks to gently remove the lower panel.

Place the device so bottom of the camera is facing up .

Remove the five marked screws with a Phillips #000 screwdriver.

Insert the spudger where arrow marks to gently remove the lower panel.

1024

Step 2

Remove the marked screw on the side of the camera with a Phillips #000 screwdriver.

Remove the marked screw on the side of the camera with a Phillips #000 screwdriver.

Step 3

Remove the marked screw with a Phillips #000 screwdriver.

Remove the marked screw with a Phillips #000 screwdriver.

Step 4

Orient the device so the lens is facing down.
Remove the two black M1.4 X 3.5 Phillips head screws using Phillips #000 screwdriver.

Orient the device so the lens is facing down.

Remove the two black M1.4 X 3.5 Phillips head screws using Phillips #000 screwdriver.

Step 5

Orient the device so the lens is facing down.
Remove the black M1.4 X 3.5 Phillips head screw.

Remove the black M1.4 X 3.5 Phillips head screw.

Step 6

              Side cover

Use the plastic opening tool with a prying motion to remove the side cover of the camera.
The cover should come off easily but you might hear light snapping or popping.

Use the plastic opening tool with a prying motion to remove the side cover of the camera.

The cover should come off easily but you might hear light snapping or popping.

Step 7

LCD

Remove the small screw under the multi/USB cover.
Use the plastic opening tool to remove the button board.

Remove the small screw under the multi/USB cover.

Use the plastic opening tool to remove the button board.

Step 8

Disconnect the control board data cable with care. Permanent damage may occur to the control board if tools are used to disconnect the data cable. Use your fingers only.
Disconnect the control board data cable by wiggling carefully with your fingertips. Set the control board to the side once it is disconnected.

Disconnect the control board data cable with care. Permanent damage may occur to the control board if tools are used to disconnect the data cable. Use your fingers only.

Disconnect the control board data cable by wiggling carefully with your fingertips. Set the control board to the side once it is disconnected.

Step 9

LCD screen is very fragile. Handle with care. Do not use tools to remove the screen.
Lift the metal plate and LCD screen simultaneously until it is perpendicular to the camera.

LCD screen is very fragile. Handle with care. Do not use tools to remove the screen.

Lift the metal plate and LCD screen simultaneously until it is perpendicular to the camera.

Step 10

              Motherboard

LCD screen is very fragile. Handle with care. Do not use tools to remove the screen.
Remove the ribbon cable connecting LCD display to camera sensor and battery housing.

Remove the ribbon cable connecting LCD display to camera sensor and battery housing.

Step 11

Make sure all ribbon cables are unplugged and remove the motherboard.
Ribbon wires can be easily damaged.

Make sure all ribbon cables are unplugged and remove the motherboard.

Ribbon wires can be easily damaged.

Step 12

              Lens

Press on the lens with your finger.
Gently pull the lens container out of the camera.
Make sure all ribbon wires are unplugged.

Press on the lens with your finger.

Gently pull the lens container out of the camera.

Make sure all ribbon wires are unplugged.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 5 other contributors

                    Marin Rusinov

Member since: 02/02/2017

797 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Leon - Mar 11, 2018

Eric C - Mar 23, 2018

Dufour - May 11, 2018

Under multi cover

Dufour - Dec 17, 2018

First at step 7

Action Shots#

Introduction#

What you need#

Action Shots

Introduction

What you need