Sony Cyber Shot Dsc P100 Camera Flash Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          10 minutes            

Sections

2

• Front Casing
• 4 steps
• Camera Flash
• 2 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackSony Cyber-shot DSC-P100

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Front Casing               

• First locate the appropriate screws for detachment.

First locate the appropriate screws for detachment.

1024

Step 2

• Remove the five screws shown using a Phillips #00 Screwdriver.
• It is important to put the small screws in a safe location in order to reassemble the casing.

Remove the five screws shown using a Phillips #00 Screwdriver.

It is important to put the small screws in a safe location in order to reassemble the casing.

Step 3

• Using a spudger, carefully pry open the front casing.

Using a spudger, carefully pry open the front casing.

Step 4

• Carefully separate the front casing from the camera body.
• CAUTION: Be careful not to break the wire connecting the front casing and the camera.

Carefully separate the front casing from the camera body.

CAUTION: Be careful not to break the wire connecting the front casing and the camera.

Step 5

              Camera Flash               

• Using tweezers, gently pull the ribbon trace out of its housing found on the left side of the flash.

Using tweezers, gently pull the ribbon trace out of its housing found on the left side of the flash.

Step 6

• Using a spudger, pry the small latch between the lens and the flash open to release the flash.
• Pull the flash away from the camera.

Using a spudger, pry the small latch between the lens and the flash open to release the flash.

Pull the flash away from the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 

                    Katie McCraw                     

Member since: 03/09/2012

191 Reputation

                                      7 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Clemson, Team 1-5, Benson Spring 2012                        

                                                  Member of Clemson, Team 1-5, Benson Spring 2012 



                    CLEM-BENSON-S12S1G5                     


                                            4 Members                     


                                            14 Guides authored