Difficulty

Difficult

Steps

9

Time Required

                          15 - 20 minutes

Sections

3

  • Front Casing
  • 4 steps
  • Back Casing
  • 2 steps
  • Camera Lens
  • 3 steps

Flags

4

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackSony Cyber-shot DSC-P100

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Front Casing
  • First locate the appropriate screws for detachment.

First locate the appropriate screws for detachment.

1024

Step 2

  • Remove the five screws shown using a Phillips #00 Screwdriver.
  • It is important to put the small screws in a safe location in order to reassemble the casing.

Remove the five screws shown using a Phillips #00 Screwdriver.

It is important to put the small screws in a safe location in order to reassemble the casing.

Step 3

  • Using a spudger, carefully pry open the front casing.

Using a spudger, carefully pry open the front casing.

Step 4

  • Carefully separate the front casing from the camera body.
  • CAUTION: Be careful not to break the wire connecting the front casing and the camera.

Carefully separate the front casing from the camera body.

CAUTION: Be careful not to break the wire connecting the front casing and the camera.

Step 5

              Back Casing
  • Remove the four screws from the casing.

Remove the four screws from the casing.

Step 6

  • Carefully pull the back casing away from the camera.

Carefully pull the back casing away from the camera.

Step 7

              Camera Lens
  • Remove the two screws on the back side of the camera surrounding the LCD screen.

Remove the two screws on the back side of the camera surrounding the LCD screen.

Step 8

  • Remove the two ribbon traces found on the left side of the lens on the front of camera holding the lens in place.
  • Carefully pull the lens away front the camera until it is released.

Remove the two ribbon traces found on the left side of the lens on the front of camera holding the lens in place.

Carefully pull the lens away front the camera until it is released.

Step 9

  • The lens is now successfully removed from the camera.

The lens is now successfully removed from the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Katie McCraw

Member since: 03/09/2012

191 Reputation

                                      7 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Clemson, Team 1-5, Benson Spring 2012                        

                                                  Member of Clemson, Team 1-5, Benson Spring 2012 



                    CLEM-BENSON-S12S1G5                     


                                            4 Members                     


                                            14 Guides authored

Macjune Tolentino - Apr 24, 2012

Reply

Is there a way to disassemble the lens to correct the alignment. My daughter dropped it and I think the mechanism has been misaligned.