Difficulty

Easy

Steps

9

Time Required

                          7 minutes

Sections

4

  • Batteries
  • 2 steps
  • Back Case
  • 4 steps
  • Front Case
  • 2 steps
  • Battery Door
  • 1 step

Flags

0

  • BackSony Cyber-Shot DSC-S90

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Batteries
  • Hold down the “open"button (gray oval with arrow pointing upwards) on the battery port door.
  • While holding the button downwards, slide the door upwards to unlock and open the door.

Hold down the “open"button (gray oval with arrow pointing upwards) on the battery port door.

While holding the button downwards, slide the door upwards to unlock and open the door.

1024

Step 2

  • Pull open the door and allow the batteries to fall out.

Pull open the door and allow the batteries to fall out.

Step 3

              Back Case
  • Remove the 2mm Phillips #00 screw under the battery port door.
  • Remove the 2mm Phillips #00 screw towards the right of the bottom-side of the camera.

Remove the 2mm Phillips #00 screw under the battery port door.

Remove the 2mm Phillips #00 screw towards the right of the bottom-side of the camera.

Step 4

  • Remove the two 2mm Phillips #00 screws (one on each side of the camera).

Remove the two 2mm Phillips #00 screws (one on each side of the camera).

Step 5

  • Use an opening tool to unlock the front case from the main body of the camera. Use the tool on the right side and bottom of the camera with the LCD screen facing you.

Use an opening tool to unlock the front case from the main body of the camera. Use the tool on the right side and bottom of the camera with the LCD screen facing you.

Step 6

  • Pull apart the back case from the main body of the camera.

Pull apart the back case from the main body of the camera.

Step 7

              Front Case
  • Use an opening tool to unlock the front case from the main body of the camera. Use the tool on the top of the camera.

Use an opening tool to unlock the front case from the main body of the camera. Use the tool on the top of the camera.

Step 8

  • Pull apart the front case from the main body of the camera.

Pull apart the front case from the main body of the camera.

Step 9

              Battery Door
  • After the front casing is removed, the battery door hinges off freely.

After the front casing is removed, the battery door hinges off freely.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Jonathan Arns

Member since: 10/28/2019

745 Reputation

                                      8 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UMass Dartmouth, Team S4-G5, Saloman Fall 2019                        

                                                  Member of UMass Dartmouth, Team S4-G5, Saloman Fall 2019 



                    UMASSD-SALOMAN-F19S4G5                     


                                            3 Members                     


                                            20 Guides authored