Difficulty
Easy
Steps
4
Time Required
5 - 10 minutes
Sections
2
- Front Panel
- 2 steps
- Tripod Receptacle
- 2 steps
Flags
0
BackSony Cyber-shot DSC-T500
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Panel
- Remove all seven black 4 mm Philips #00 screws holding the front panel into place. Two on each of the sides of the camera and three on the bottom.
Remove all seven black 4 mm Philips #00 screws holding the front panel into place. Two on each of the sides of the camera and three on the bottom.
1024
Step 2
- Gently lift the front panel up off the back of the camera prying up around the edges using a plastic opening tool or spudger if necessary.
Gently lift the front panel up off the back of the camera prying up around the edges using a plastic opening tool or spudger if necessary.
Step 3
Remove Inner Screw
- Remove the one sliver 4mm Philips #00 screw that is holding the receptacle in place near the bottom of the camera.
- There is one other screw just like this one on the top of the camera near the capture button. That’s not the one you want to remove here
Remove the one sliver 4mm Philips #00 screw that is holding the receptacle in place near the bottom of the camera.
There is one other screw just like this one on the top of the camera near the capture button. That’s not the one you want to remove here
Step 4
Remove Tripod Receptacle
- Remove the tripod receptacle by simply lifting it out with your hands or with tweezers if necessary.
Remove the tripod receptacle by simply lifting it out with your hands or with tweezers if necessary.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Chelsea Vitone
Member since: 01/21/2015
213 Reputation
2 Guides authored
Badges:
8
+5 more badges
Team
UWT Liner: Group 4
Member of UWT Liner: Group 4
Community
6 Members
8 Guides authored