Difficulty

Moderate

Steps

16

Time Required

Suggest a time??

Sections

4

  • Battery
  • 2 steps
  • Back Cover
  • 6 steps
  • CCD Module
  • 4 steps
  • AV Port
  • 4 steps

Flags

0

  • BackSony Cyber-shot DSC-T9

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • The battery cover is located on the right side of the camera.
  • Slide the cover to expose the battery.

The battery cover is located on the right side of the camera.

Slide the cover to expose the battery.

1024

Step 2

  • Ensure that the battery lines up properly with the slot in the camera.
  • Slide battery in.
  • Slide cover closed.
  • Battery not shown

Ensure that the battery lines up properly with the slot in the camera.

Slide battery in.

Slide cover closed.

Battery not shown

Step 3

              Back Cover
  • This is the camera without the front cover.

This is the camera without the front cover.

Step 4

  • Remove tripod piece located at the bottom of the camera. This piece should slide out with ease.

Remove tripod piece located at the bottom of the camera. This piece should slide out with ease.

Step 5

  • Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are.

Slide open the top panel. This is located on the top of the camera, where the power button and shutter button are.

Step 6

  • Pull apart the inner hardware from the back case by prying on the left side.

Pull apart the inner hardware from the back case by prying on the left side.

Step 7

  • Remove the back cover.

Remove the back cover.

Step 8

  • The back cover is now removed from the internal hardware.

The back cover is now removed from the internal hardware.

Step 9

              CCD Module
  • This is the CCD module.

This is the CCD module.

Step 10

  • Use plastic opening tool pop open the two ribbons attaching to the CCD module.
  • These are the two ribbons.

Use plastic opening tool pop open the two ribbons attaching to the CCD module.

These are the two ribbons.

Step 11

  • Remove CCD module.
  • You may have to tug on the ribbons to remove the CCD module.

Remove CCD module.

You may have to tug on the ribbons to remove the CCD module.

Step 12

  • The CCD module is now removed from the camera.

The CCD module is now removed from the camera.

Step 13

              AV Port
  • These two screws hold in the AV port.
  • Use Phillips screwdriver to remove screws.

These two screws hold in the AV port.

Use Phillips screwdriver to remove screws.

Step 14

  • Remove metal screw plate.

Remove metal screw plate.

Step 15

  • Use pry stick to pop off ribbon.

Use pry stick to pop off ribbon.

Step 16

  • Remove AV port from camera.

Remove AV port from camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Stephannie Allen

Member since: 03/11/2013

231 Reputation

                                      10 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Clemson, Team 13-1, Benson Spring 2013                        

                                                  Member of Clemson, Team 13-1, Benson Spring 2013 



                    CLEM-BENSON-S13S13G1                     


                                            4 Members                     


                                            20 Guides authored