Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

3

  • Battery
  • 2 steps
  • Front Cover
  • 4 steps
  • CCD Module
  • 4 steps

Flags

0

  • BackSony Cyber-shot DSC-T9

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • The battery cover is located on the right side of the camera.
  • Slide the cover to expose the battery.

The battery cover is located on the right side of the camera.

Slide the cover to expose the battery.

1024

Step 2

  • Ensure that the battery lines up properly with the slot in the camera.
  • Slide battery in.
  • Slide cover closed.
  • Battery not shown

Ensure that the battery lines up properly with the slot in the camera.

Slide battery in.

Slide cover closed.

Battery not shown

Step 3

              Front Cover
  • Remove screws from outside of camera. There are 6 screws total.
  • 3 screws on underside.
  • 1 screw on right side, near battery cover.
  • 2 screws on left side.

Remove screws from outside of camera. There are 6 screws total.

3 screws on underside.

1 screw on right side, near battery cover.

2 screws on left side.

Step 4

  • Use screwdriver to remove screws.

Use screwdriver to remove screws.

Step 5

  • Gently pull the front cover off of the main camera.
  • All of the inner parts of the camera are attached to the back screen.

Gently pull the front cover off of the main camera.

All of the inner parts of the camera are attached to the back screen.

Step 6

  • The front cover is now removed from the camera and the internal hardware is now exposed.

The front cover is now removed from the camera and the internal hardware is now exposed.

Step 7

              CCD Module
  • This is the CCD module.

This is the CCD module.

Step 8

  • Use plastic opening tool pop open the two ribbons attaching to the CCD module.
  • These are the two ribbons.

Use plastic opening tool pop open the two ribbons attaching to the CCD module.

These are the two ribbons.

Step 9

  • Remove CCD module.
  • You may have to tug on the ribbons to remove the CCD module.

Remove CCD module.

You may have to tug on the ribbons to remove the CCD module.

Step 10

  • The CCD module is now removed from the camera.

The CCD module is now removed from the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 4 other contributors 


                    Stephannie Allen

Member since: 03/11/2013

231 Reputation

                                      10 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Clemson, Team 13-1, Benson Spring 2013                        

                                                  Member of Clemson, Team 13-1, Benson Spring 2013 



                    CLEM-BENSON-S13S13G1                     


                                            4 Members                     


                                            20 Guides authored