Difficulty

Moderate

Steps

7

Time Required

                          6 minutes

Sections

1

  • LCD Screen
  • 7 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackSony Cyber-shot DSC-TX55

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              LCD Screen
  • Slide open the battery cover in the direction that the arrows on device are pointing.
  • Flip the blue battery lock to eject the battery.
  • Remove the battery from the device.

Slide open the battery cover in the direction that the arrows on device are pointing.

Flip the blue battery lock to eject the battery.

Remove the battery from the device.

1024

Step 2

  • Using your Phillips #00 screwdriver, remove all four 0.3 cm screws that are located on both ends, as well as the bottom of your Cyber-Shot.
  • Make sure that your screws are placed on a flat, still surface so they do not roll away.

Using your Phillips #00 screwdriver, remove all four 0.3 cm screws that are located on both ends, as well as the bottom of your Cyber-Shot.

Make sure that your screws are placed on a flat, still surface so they do not roll away.

Step 3

  • Gently pull away the back end of the camera where the LCD screen is located.
  • Remove the metal frame that is located around the LCD screen.

Gently pull away the back end of the camera where the LCD screen is located.

Remove the metal frame that is located around the LCD screen.

Step 4

  • Remove the front cover.

Remove the front cover.

Step 5

  • Gently remove the lens from the device.
  • The lens will hang on by the orange strips, be careful not to tug on the lens.

Gently remove the lens from the device.

The lens will hang on by the orange strips, be careful not to tug on the lens.

Step 6

  • Gently slide the LCD screen using very light pressure to the right until it pops open.

Gently slide the LCD screen using very light pressure to the right until it pops open.

Step 7

  • The LCD screen will open to the right.
  • Remove the orange tab from the device.

The LCD screen will open to the right.

Remove the orange tab from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 1 other contributor 


                    Megan East

Member since: 10/13/2015

555 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Sam Houston State, Team 2-5, Blackburne Fall 2015                        

                                                  Member of Sam Houston State, Team 2-5, Blackburne Fall 2015 



                    SHSU-BLACKBURNE-F15S2G5                     


                                            4 Members                     


                                            10 Guides authored