Difficulty

Very easy

Steps

7

Time Required

                          5 minutes

Sections

1

  • Back Casing
  • 7 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackSony Cyber-shot DSC-W150

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Casing
  • The screws from the camera are extremely small, so it is a good idea to have a small container to hold all the screws as you remove them.

The screws from the camera are extremely small, so it is a good idea to have a small container to hold all the screws as you remove them.

1024

Step 2

  • Take your screwdriver and remove the four silver bottom screws of the camera.
  • The picture shows the lens facing away from you and the LCD facing you.

Take your screwdriver and remove the four silver bottom screws of the camera.

The picture shows the lens facing away from you and the LCD facing you.

Step 3

  • On the right side of the camera, remove the two silver screws using the screwdriver.
  • The picture shows the lens facing away from you and the LCD screen facing you.

On the right side of the camera, remove the two silver screws using the screwdriver.

The picture shows the lens facing away from you and the LCD screen facing you.

Step 4

  • On the left side of the camera, remove the two silver screws using the screwdriver.
  • The picture shows the lens facing away from you and the LCD screen facing you.

On the left side of the camera, remove the two silver screws using the screwdriver.

Step 5

  • Gently detach the back cover by holding onto both sides of the camera and pulling them apart.

Gently detach the back cover by holding onto both sides of the camera and pulling them apart.

Step 6

  • After detaching the back cover, carefully pull it off.

After detaching the back cover, carefully pull it off.

Step 7

  • The back cover should now be separated from the camera.

The back cover should now be separated from the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 9 other contributors 


                    iRobot

Member since: 09/24/2009

1 Reputation

                                      646 Guides authored                  



                       Badges:
                       36







                                                        +33 more badges